ROHN KY510 Dish Antenna Side Mount with 4.50" inch OD Pipe for 65G Tower
ROHN
Made in the USA!
The ROHN KY510 Microwave and Dish Antenna Side Mount includes (2) Angled Steel Cross-Members that Bolt directly to and across any (1) of the 3 Faces of a Standard 65G Tower Section, placing the Dish Antenna Mast pipe off to the side of the face that the assembly was bolted on to. Also includes a 5 Foot x 4 inch SCH40 (4.50 inch OD) Pipe attached via U-bolts to the far side of the Brackets, that in turn, are attached to the (2) legs on each side of the Tower Face via additional U-Bolts. A ROHN TA65 Tower Torque Arm Stabilizer Assembly is recommended in the immediate vicinity of this Mount.
ROHN KY510 mount goes together quickly, with a minimum of bolted connections. The angle steel cross members connect directly to the tower legs with easy-to-use U-bolts. This mount is hot dip galvanized.
ROHN Tower Antenna Mount and Assemblies
ROHN Tower Antennas Mounts for All Series. Select by the ROHN Tower Series and choose between Tower Top Antenna Mounts, Tower Apex Antenna Mounts, Tower Side Arm Antenna Mounts with or without Tiebacks and Tower Face Antenna Mounts. These Mounts will differ based on the Type of Antenna, the Size of the Mast Pipe, Pole or Tube it is designed to be Mounted on and the Tower Leg Size it will be Mounted to. These Mounts were Primarily Engineered for ROHN G Series to include 25G 45G 55G 65G, RTL Towers, RSL Towers and SSV Towers. As there are Other Manufacturers with Similar Engineering in Their Communications Tower Series, you would find that some of the Antenna Tower Mounts will fit other Branded Towers as well.
Sorry, we are offline,
click here to send us message
