ROHN KY1048A 6' Foot Side Arm Antenna Mount with 2.375" inch OD Pipe for 65G Tower

ROHN UHF25G Side Arm Antenna Mount of CB/HAM/Marine/Business Radio Whip for 25G Tower
Made in the USA!
This UHF25G Single Side Arm Mount is used for UHF/FM/CB/HAM Whip, Cell Data, Internet, Telemetry, Business Band Radio and other Light Duty Antennas. Fastens with Saddle Clamps. Projects your mast held in the clamp (up to 1.25 inches in Diameter with bolts supplied) to distance of 12 inches from the tubular side rail of the tower face to which it is attached.

ROHN DM25G2 Microwave Dish Antenna Mount with 5' foot by 2.38" OD Pipe for 25G Tower Face
Made in the USA!
The ROHN DM25G2 Microwave Dish (or Other Narrow Beamwidth) Antenna Mount includes (2) Angle Iron Hot Dip Galvanized Steel Crossmembers that Bolt directly to any (1) of the (3) Faces of a 25G Tower Section. Also includes a 5 Foot by 2 inch SCH40 (2-3/8 inch OD) Pipe attached via U-bolts to the center of the Brackets, that in turn, are attached to the (2) leg rails on each side of the Tower Face via additional U-Bolts.

ROHN DM45G2 Microwave Dish Antenna Mount with 5' foot by 2.38" OD Pipe for 45G Tower Face
Made in the USA!
The ROHN DM45G2 Microwave Dish (or Other Narrow Beamwidth) Antenna Mount includes (2) Angle Iron Hot Dip Galvanized Steel Crossmembers that Bolt directly to any (1) of the (3) Faces of a 45G Tower Section. Also includes a 5 Foot by 2 inch SCH40 (2-3/8 inch OD) Pipe attached via U-bolts to the center of the Brackets, that in turn, are attached to the (2) leg rails on each side of the Tower Face via additional U-Bolts.

ROHN DM454 Microwave Dish Antenna Mount with 5' foot by 4.50" OD Pipe for 45G Tower
Made in the USA!
The ROHN DM454 Microwave Dish (or Other Narrow Beamwidth) Antenna Mount includes (2) Angle Iron Hot Dip Galvanized Steel Crossmembers that Bolt directly to any (1) of the (3) Faces of a 45G Tower Section. Also includes a 5' foot by 4" inch SCH40 (4.5 inch OD) Pipe attached via U-bolts to the center of the Brackets, that in turn, are attached to the (2) leg rails on each side of the Tower Face via additional U-Bolts.