Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

ROHN R-BGK2G Tower Base Ground Kit

Manufacturer CodeBGK2G
AvailabilityUsually ships in 24 Hrs
ShippingCan ship anywhere

(1) 5/8" x 8' Ground Rod
(1) Ground Rod Clamp
(10') of #4 Solid Copper Wire
(1) J-Clamp 1-1/4 to 2 inch

Bulk Quantities Available Here!

ROHN BGK2G Tower Base Section Grounding Kit
Primarily for 25G,45G,55G and 65G REV. F Towers with Fixed Bases, also used in Self-Supporting Tower Kits.
10 Feet of #4 Solid Copper Wire
(1) 5/8" x 8 Foot Copper Clad Ground Rod.
(1) 5/8 Inch Ground Rod Clamp
(1) J-Clamp 1-1/4 to 2 inch (onto 55G/65G Section Tubular Rail).
Comprises enough material to ground 1 Tower Base Section Tubular Rail.

These are REV. F Tower structure Grounding Kits. The NEW REV. G Tower structure Grounding Kits use wire rope vs. the solid copper found here, in addition to revised clamping methodogies. (2) of these Tower Base Grounding Kits are included in each ROHN 25G 45G 55G 65G Self-Supporting Tower Kit with a Fixed Rigid Base.
Specification Sheet
grounding type
Grounding Kits
Rate this product.
Product isn't rated yet. Write a review.

Ground your Coaxial Cable System

Commensurate with Coaxial Cable TV Antenna and Satellite TV Splitter Installation, you want to Ground your Cable TV or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your Satellite Receiver and TV Set(s). The Integral Grounding Block designed onto most Outdoor Use Compatible Satellite Signal Splitter we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Satellite TV, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.

Grounding & Bonding Are Important

Ground Blocks and Proper Grounding are an Important, often overlooked, aspect of Your Over-all Cable TV, HDTV or Satellite Antenna Installation and Safety. Proper Grounding can also Reduce the Reception of Interfering RF Signals. Grounding of Masts, Antennas, Cable TV and other RF Distribution Systems are covered by the NEC. Grounding can be as simple as a 12 AWG Ground Wire connected a short distance away to a 8 foot 5/8" DIA Copper Ground Rod (not supplied) or Bonded to the Existing Power Ground by the Power Meter installed on the side of your Home or Office. You may notice that most new Cable TV, Satellite and TV Antenna Installations are effected in this Manner. However, most State and some Local codes will contain requirements that supercede that of the NEC. Please Refer to Your Local Building and Electrical Codes...

Products   Recently Viewed