Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

ROHN R-BGK2GGX Tower Base Ground Kit

Price$97.95
Manufacturer CodeBGK2GGX
Qty
AvailabilityUsually ships in 24 Hrs
ShippingCan ship Canada

Highlights
(1) 5/8" x 10' Ground Rod
(1) Ground Rod Clamp
(1) CPC1.5/2 Rail Clamp
(15') of 7/16 6x25 EIP IWRC RRL Wire Rope

Bulk Quantities Available Here!

ROHN BGK2GGX Tower Base Section Grounding Kit
New REV. G Grounding Kit for 55G and 65G Guyed Towers. Comprises enough material to ground 1 Tower Base Section Tubular Rail.
Includes:
15 Feet of 7/16 6x25 EIP IWRC RRL Wire Rope
(1) 5/8" x 10 Foot Copper Clad Ground Rod.
(1) 3/4 Inch Ground Rod Clamp
(1) CPC1.5/2 Connection Clamp to 55G/65G Section Tubular Rail.
Comprises enough material to ground 1 Tower Base Section Tubular Rail.

(3) of these Tower Base Grounding Kits are included in each ROHN 55G 65G Complete Guyed Tower Kit with a Flat or Fixed Rigid Base.
Specification Sheet
grounding type
Grounding Kits

Ground your Coaxial Cable System

Commensurate with Coaxial Cable TV Antenna and Satellite TV Splitter Installation, you want to Ground your Cable TV or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your Satellite Receiver and TV Set(s). The Integral Grounding Block designed onto most Outdoor Use Compatible Satellite Signal Splitter we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Satellite TV, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.

Grounding & Bonding Are Important

Ground Blocks and Proper Grounding are an Important, often overlooked, aspect of Your Over-all Cable TV, HDTV or Satellite Antenna Installation and Safety. Proper Grounding can also Reduce the Reception of Interfering RF Signals. Grounding of Masts, Antennas, Cable TV and other RF Distribution Systems are covered by the NEC. Grounding can be as simple as a 12 AWG Ground Wire connected a short distance away to a 8 foot 5/8" DIA Copper Ground Rod (not supplied) or Bonded to the Existing Power Ground by the Power Meter installed on the side of your Home or Office. You may notice that most new Cable TV, Satellite and TV Antenna Installations are effected in this Manner. However, most State and some Local codes will contain requirements that supercede that of the NEC. Please Refer to Your Local Building and Electrical Codes...

Products   Recently Viewed