ROHN Tower GAC3455TOP Concrete Down Guy Anchor with 5 Hole Equalizer Plate
ROHN GAC3455TOP Concrete Guy Anchor Rod with 5 Hole Equalizer Plate
Embeds in Standard Concrete Anchor Block for ROHN 25G 45G 55G 65G Tower 3 or 5 Level Down Guy Attachment via Integral 5 level Equalizer Plate with 17,670 lbs. of allowable load. This Particular Configuration of Equalizer Plate uses the Eye to Jaw Turnbuckles (ie R-3/8TBE&J) as the Down Guy attachment method. Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.
This Down Guy Concrete Anchor Rod with Integral 5 Hole Down Guy Wire Equalizer Plate is the Bottom Half of your ROHN 25G 45G 55G 65G Guyed Tower Installation. Install the Guy Brackets at Heights indicated by the ROHN Catalog (Link above) as per REV. G or REV. F Wind Load Ratings, Space and Install in the Concrete Anchor Rods in Anchor Blocks as Specified for the Particular Height and Wind Load Application by Model Number.
Antenna Guy Wire for Guyed Towers & Telescopic Masts
3 Star Stocks EHS 7 Strand Guy Wire for use on ROHN 25G, 45G, 55G and 65G Guyed Towers Systems as well as Utility OSP Cabled and Fiber Systems. Our EHS Tower Guy wire comes in 100', 250', 500',1000, in coils or reels and 5000 FT wooden spools. PLP-GWD Guy wire Dispenser available (optional). It is recommended that "Initial Tension" (10% of Maximum Limit) is attained with the Turnbuckle travel extended prior to tensioning with same. Annex the Data shown in the Table below when referencing guy charts shown for ROHN Towers:
Our 6/18 (6 strand 18AWG) and 6/20 (6 strand 20AWG with or with out Plastic Coating) guy wire comes in lengths of 50', 100', 250', 500' up to 1000' FT. Choose from 6/18 and 6/20 for Guying Telescopic Antenna Masts. Also, Complete Telescopic Guy Wire Kits are also available.
Sorry, we are offline,
click here to send us message
