RGKG RSL Grounding Kit - 3 Legs
Rohn RSL Tower Grounding kit, per Rev. G, (3) 5/8” x 10’ ground rods, 7/16” IWRC stranded galvanized ground leads and clamps.
http://www.3starinc.com/rohn_rsl_tower_grounding_kit_for_3_legs_rgkg
RGKG-1 RSL Grounding Kit - 1 Leg
Rohn RSL Tower Grounding kit, per Rev. G, (2) 5/8” x 8’ ground rod, 7/16” IWRC stranded galvanized ground lead and clamps for one tower leg.
http://www.3starinc.com/rohn_rsl_tower_grounding_kit_for_1_leg_rgkg-1
ROHN 502 Porcelain Strain Insulator for up to 3/8EHS Strand Down Guy 10,000 lbs. Rating
The ROHN 502 is a Porcelain Strain Insulator rated at 10,000 lbs. Ultimate Strength with a 5,000 lbs. Working Load Limit (WLL) for up to 3/8" inch strand. It has 5/8" holes for Clevis and Preformed Dea...
http://www.3starinc.com/rohn_502_guy_strain_porcelain_insulator_10000_lbs
ROHN 504 Porcelain Strain Insulator for up to 1/2EHS Strand Down Guy 12,000 lbs. Rating
The ROHN 504 is a Porcelain Strain Insulator rated at 12,000 lbs. Ultimate Strength with a 6,000 lbs. Working Load Limit (WLL) for up to 1/2" inch strand. It has 7/8" holes for Clevis and Preformed Dea...
http://www.3starinc.com/rohn_504_guy_strain_porcelain_insulator_12000_lbs
ROHN 506 Porcelain Strain Insulator for up to 5/8EHS Strand Down Guy 20,000 lbs. Rating
The ROHN 506 is a Porcelain Strain Insulator rated at 20,000 lbs. Ultimate Strength with a 10,000 lbs. Working Load Limit (WLL) for up to 5/8" inch strand. It has 1" holes for Clevis and Preformed Dead...
http://www.3starinc.com/rohn_506_guy_strain_porcelain_insulator_20000_lbs
ROHN ROHNJACK Alignment Assembly/Disassembly Tool for ROHN 20G 25G 45G 55G Tower Section
Made in the USA!
The ROHNJACK is used to Assemble/Disassemble ROHN Tower Sections and Align Tower Legs during assembly and Tower erection. It is Not a Gin Pole but works together with one for easy removal and ...
http://www.3starinc.com/rohnjack-g-series-tower-assembly-disassembly-tool
ROHN RP25G Single Rotor Post 1.25"OD for Small Antenna on 25G Series Tower
Made in the USA!
The ROHN RP25G is for Mounting Antenna Rotors onto a 1.25 DIA x 7.5inch post. Fastens with Saddle Clamps to the Tower leg (also 1.25 inch DIA), with 4.75 inches of clear space between Tower Rail mount ...
http://www.3starinc.com/rohn_25g_tower_antenna_rotor_post_r-rp25g
ROHN RP25G CM Double Rotor Post 1.25"OD for Antenna Array on 25G Series Tower
Made in the USA!
The ROHN RP25GCM Antenna Rotor Post is Galvanized Steel T-tube Post with (2) U-bolts to attach to any Side Rail anywhere on a 25G Tower Section for Mounting a Special CM Attachment Style Light Duty ...
http://www.3starinc.com/rohn_25g_tower_special_antenna_rotor_post_r-rp25gcm
IZZY RPC-1.0-HDG Rigid Pipe and Conduit Clamp for 1.0" ID Pipe, compatible with 7/8" and 1-5/8" Din Rail Strut Track features HDG Finish
http://www.3starinc.com/1-0-rigid-pipe-and-conduit-clamp-hdg-for-7-8-and-1-5-8-din-rail-strut-track
IZZY RPC-1.25-HDG Rigid Pipe and Conduit Clamp for 1.25" ID Pipe, compatible with 7/8" and 1-5/8" Din Rail Strut Track features HDG Finish
http://www.3starinc.com/1-25-rigid-pipe-and-conduit-clamp-hdg-for-7-8-and-1-5-8-din-rail-strut-track
