3 Star 3S-FRMPAD Protective Rubber Pad for FRM Non-Pen Roof Mount 42"L x 36"W x 3/8" Thick
This FRMPAD provides a Protective Layer to lay down between the Roof Surface and the Non-Penetrating Roof Antenna Mount Frame before Installation. The 3/8 Thick Pad Kit is made up of (2) 18&quo...
http://www.3starinc.com/protective-barrier-pad-for-frm-roof-mount-3s-frmpad
3S- GEM-4060 Adjustable Gable End Eave Antenna Mast Bracket Mount
Used for easy mounting on the eave of a house. Lower Bracket of 16 gauge Hot Dip Galvanized steel, non-adjustable 48 inches. Both the upper and lower brackets are for masts up to 2.25 inches in diameter with...
http://www.3starinc.com/vmp-gem4060-adjustable-gable-end-antenna-mount-pipe-bracket
3S-HD-PTP-35 Pole to Pole Mount
Medium duty pole to pole mount. Attaches two pieces of tubing 1.50" OD to 2.00" ODHDG
http://www.3starinc.com/hdg-heavy-duty-pole-to-pole-mast-mount-medium-125-225-inch
3S-HD-PTP-4 Pole to Pole Mount
Medium duty pole to pole mount. Attaches two pieces of tubing 1.25" OD to 3" OD. Zinc plated.
http://www.3starinc.com/heavy_duty_pole_to_pole_mast_mount_medium
EZ-HD-PTP-6 Pole to Pole Mast Mount
Heavy duty pole to pole mast mount. Attaches two pieces of tubing 1.25" OD to 4.25" OD.HDG plated.
http://www.3starinc.com/heavy_duty_pole_to_pole_mast_mount_large
EZ-HD-PTP-6S Heavy Duty HDG Alligator Mast Pole Clamp Jaw Set of 2 for Pipe 1.25" to 4" OD
Heavy duty pole mast mount Clamp Jaws. Can clamp tubing 1.25" OD to 4.00" OD or larger. HDG. No Hardware or complete clamping solution included...
http://www.3starinc.com/heavy_duty_pole_mast_clamp_jaws_large
3S-HDG-PTP-3S Heavy Duty HDG Alligator Mast Pole Jaw Clamp Set of 2 for Pipe 1.50" to 2" OD
Made in the USA!
The 3S-HDG-PTP-3S Heavy Duty Pole Mast Mount Clamp Jaws can hold Mast Tubing from 1.50" OD to 2" OD. No Hardware or complete clamping solution included.
Includes 2 - H...
http://www.3starinc.com/heavy_duty_pole_mast_clamp_jaws_medium
3S-HDG-PTP-4S Heavy Duty HDG Alligator Mast Pole Jaw Clamp Set of 2 for Pipe 1.25" to 3" OD
Made in the USA!
The 3S-HDG-PTP-4S Heavy Duty Pole Mast Mount Jaw Clamps can hold Mast Tubing from 1.25" OD to 3" OD. No Hardware or complete clamping solution included.
Includes 2 - HD...
http://www.3starinc.com/heavy-duty-hdg-alligator-clamp-for-pipe-1-25-4-od
3 Star Inc 3S-HMK Hardware Mounting Kit for Antenna Wall Mount Bracket Assemblies
Made in the USA!
The 3S-HMK Hardware Mounting Kit is comprised of (2) 2.5" x 2.5" x 36" inch Angle Brackets for backplates with (4) 1/2" x 18" inch long Threaded Rods, Nuts and Lock Washe...
http://www.3starinc.com/pwm-hardware-mounting-kit-for-antenna-wall-mount-bracket-assemblies
3 Star JRM20010 Non-Penetrating Roof Antenna Mount 2.00 in. x 10 ft. Mast
Made in the USA!
Mast Dimensions - 2“ Galvanized Pipe (2.00" O.D.) x 120”
The ROHN JRM is a non-penetrating, 5' square ballast type roof mount that supports a 10' Mast Pipe with up to 12 standard co...
http://www.3starinc.com/3-star-jrm20010-non-penetrating-roof-antenna-mount-200-in-x-10-ft-mast
