Your Cart

Product	Qty	Price
Rohn RSL Tower...	4	$1,540.00
RASK12 Accessory...	5	$296.00
ROHN RSL 100...	11	$6,636.00
Rohn RSL RGKG...	6	$430.00
50 Foot Telescopic...	9	$282.00
Rohn RSL Tower...	5	$156.00
ROHN H50 Telescopi...	40	$189.00
ROHN 25G Tower...	1	$1,985.00
5' Foot X 1...	6	$16.30
20 Foot Telescopic...	3	$158.00
ROHN 65G Anti...	2	$960.00
Rohn RSL Tower...	5	$345.00
24 inch Deluxe...	8	$34.95
HOLLAND LA...	2	$11.95
EZ32A Telescopic...	9	$21.95
ROHN 12 inch...	14	$84.00
ROHN 45G Self...	2	$595.00
PPC Single...	1	$1.25
EZ19B Roof...	4	$18.08
ROHN RSL TOWER...	2	$33.00
Rohn RSL Tower...	3	$3,710.00
Non-Penetrating...	1	$131.00
50 Foot Telescopic...	4	$325.00
24 dB 1 GHz...	1	$2.65
EZ32C Telescopic...	8	$24.95
LNS5010 Black...	2	$39.95
ROHN 65G 40...	2	$5,090.00
75 FT RG11...	5	$45.00
12 inch Telescopic...	10	$23.50
4 inch Heavy...	7	$11.95
Complete Grounding...	8	$32.00
ROHN 24 inch...	5	$88.00
ROHN 25G Accessory...	2	$74.00
Rohn RSL Tower...	4	$625.00
Turnbuckle...	2	$3.05
ROHN Lightning...	7	$145.00
Concrete Base...	1	$14.95
ROHN TUF TUG...	4	$335.00
30 inch Telescopic...	5	$24.95
53" X 2.00"...	4	$17.95
ROHN 25G Tower...	1	$369.00
ROHN TUF TUG...	1	$325.00
LNS5082 RG6...	1	$27.95
EZ32 Telescopic...	3	$14.95
2.5" - 5.5"...	1	$14.65
18 inch Telescopic...	6	$28.40
16 dB 2 Port...	1	$2.89
Rohn RSL Tower...	7	$60.50
ROHN RSL 100...	5	$6,090.00
DS-3000 J Pipe...	4	$28.95
EZ TM-50-U...	6	$164.00
TTRSL100 Safety...	5	$850.00
5' Foot X 1...	2	$16.00
EZ TM-50-5U...	1	$115.00
EZ46-3PO Pitch...	2	$1.90
ROHN 25G Assembly...	1	$186.00
ROHN 4 inch...	8	$39.00
ROHN 65G Adjustabl...	1	$745.00
RCA Male to...	1	$0.99
Rohn RSL Tower...	1	$715.00
ROHN Universal...	6	$70.38
PPC EX6XL PLUS...	1	$0.26
Rohn RSL Tower...	5	$310.00
Telescopic...	30	$164.00
8 inch Deluxe...	1	$16.95
Broadband Digital...	1	$26.95
Rohn RSL Tower...	3	$372.00
ROHN 8 inch...	8	$79.00
PLA1000 F Connecto...	2	$49.95
Rohn RSWGB...	4	$260.00
ROHN 45G 35...	1	$1,715.00
ROHN NPPK Non...	1	$469.95
TTRSL50 Safety...	1	$580.00
ROHN 18 inch...	5	$86.00
24 inch Telescopic...	1	$34.75
24 dB 2 Port...	1	$2.89
Rohn RSL Tower...	3	$1,150.00
225 FT RG11...	1	$99.00
Rohn RSL Tower...	2	$196.00
RG6 RG59 RG58...	1	$8.95
3 inch HDG...	1	$13.95
CAT6 Direct...	1	$300.38
Rohn RSL Tower...	3	$58.00
Rohn RSL Tower...	3	$1,345.00
ROHN Bolt Kit...	2	$7.50
100 FT RG11...	2	$55.00
ROHN 25G Complete...	1	$4,480.00
HOLLAND 12...	1	$2.65
Rohn RSL Tower...	6	$592.00
ROHN 25G 20...	1	$540.00
50 FT RG11...	4	$35.00
125 FT RG11...	2	$59.00
Telescopic...	5	$120.00
ROHN 45G 55G...	2	$290.00
ROHN 25G Tower...	2	$335.00
EZ46-3 Pitch...	2	$3.95
ROHN Lightning...	1	$69.00
HOLLAND 16...	1	$2.65
HOLLAND 2-Way...	1	$1.60
Digital Broadband...	1	$29.95
RG6 Underground...	1	$68.00
ROHN 25G Torque...	1	$350.00
ROHN 25G Top...	1	$264.00
8' Foot X 1...	1	$27.00
ROHN Tower...	1	$38.00
Dual Port Coaxial...	1	$1.35
10' Foot X...	1	$27.95
#12 Solid Copper...	2	$24.95
3/8 X 4 Foot...	1	$16.00
RG6 Underground...	1	$70.00
HOLLAND HDA...	1	$189.95
5/8 inch Round...	1	$14.95
LNS5000 Big...	1	$67.95
ROHN Leg Mounted...	1	$165.00
ROHN 65G Tower...	1	$390.00
RG6 Underground...	1	$34.00
27 dB 1 GHz...	1	$2.65
3 inch wall...	1	$12.95
Goods Total	421	$206,312.26
View Cart Check out

12 inch Telescopic TV Antenna Mast Wall Mount Bracket 3S-WM12W

Telescopic TV Antenna Mast 12" Wall Mount Bracket

View Larger Image

Price$23.50

Manufacturer Code3S-WM12W

Qty

Add to Cart View Cart Check out Shipping Calculator

AvailabilityUsually ships in 24 Hrs

ShippingCan ship Canada

Highlights

Galvanized Finish
12 inch Clearance
Adjustable to fit Pipe 1 to 4 inch DIA
3rd Support Leg
Wall Mount for:
ROHN H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850

3S-WM12W Telescopic TV Antenna Mast 12" Wall Mount Bracket

Made in the USA!
is designed to Wall Mount Support ROHN H50, H40, H30, H20 Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Masts. Adjustable for Clamping ANY HDTV Antenna Masts from 1.25 to 3 inches in Diameter. Guy Wire Support for Mast Sections above this mount will still be required. This Bracket will Stand off any Antenna Mast within this Diameter range, but is NOT designed to support the weight and load of any Telescopic Antenna Mast off of the Ground. The Set Screw Feature Siezes the Mast from Twisting due to Antenna Load, assuring the Antenna remains on Target. Bonding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance. (Mast not included).
Compare to ROHN R-WM12S and R-WM12D

Note

This "Y" Wall Mount Bracket with 3rd Leg Support is Designed for Wall Mount Support of Antenna Masts of all Diameters from 1.25 inch to 3 inches with 12 inches of clearance from the Wall with the added reinforcement of a 3rd leg that goes to transfer the weight load leverage to the wall, but not the weight of a Telescopic Antenna Mast or ANY Mast greater than 10 Feet in Height (Depending on Antenna size!) off of the Ground and on the Wall alone. Use a Ground Plate like EZ32A or GTMBL to mount the Bottom of a Telescopic Antenna Mast from the ground up, with the Wall Bracket maintaining vertical alignment and clearance from the Wall to pass Roof edge. These Mounts do not replace or otherwize reduce the need for proper guying of the Telescopic Antenna Masts. As with all Masts, Guy wire support and Grounding are Critical to Antenna Survival.

Buyers Guide

3 Star Inc - EZ 30-12W (Spec & Install)

Download

EZ46-3PO Pitch Pad Moisture Barrier Kit - $1.90

Add to Cart

28" Inch X 1.66" to 2" OD Satellite TV Antenna Mast Pole Combination | 5994 - $14.95

Add to Cart

53" X 2.00" OD Satellite Dish Antenna Ground Mast Pole - $17.95

Add to Cart

Rate this product.

Product isn't rated yet. Write a review.

Wall & Eave Mount Brackets

Wall & Eave Mount Brackets for Satellite TV Antenna Mast, Cellular Wireless Internet, Business Band and Telescopic Antenna MastsIt is Important to choose an Antenna Mount and Wall Mounting Location with a Picture of the Finished Antenna Installation in Mind. Be Sure to First select a location that lends itself to applying a Vertical, Cantilevered, Twisting Load without Compromising the Integrity of the Wall Material you affix to. Most Modern Exterior Decorative Wall Finishes most often do not have the Strength to Hold the Weight and Pressure of a Large TV Antenna under Wind Load without fail. Beams and Studs within the Wall are an Absolute Must to Locate when the Wall Composition is anything other than Solid wood or Concrete. Attach to these Strength Members. Further, Think about what's underneath the Wall exterior. Is it stronger, will it yield to Pressure over time as well? Sandwich additional Material (wood or steel) to the backside or both sides of the wall at the points where the mount attaches, as to distribute the load on relatively weak wall materials and to dampen vibration from Wind. Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification. Further, the NEC (National Electrical Code partly defines a good Ground connection as being as short as possible, you must affix a connection to a good Earth Ground prior to Premise entry or Bond to an existing one.