30' Foot Telescoping Antenna Mast Pole Pipe | EZ TM-30
3 Star Inc
Made in the USA!
This 2 section 16 gauge inner, 18 gauge outer, Telescopic Antenna Mast collapses down to 10 Feet in length that with overlapping, extended mast height is 28' 2" Used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas.
Manufacturers recommend that masts heights of 10 feet and higher above the uppermost bracket be guyed for Addition Wind Load Support. Bonding/Grounding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance
(Antenna, Down Guys and Mounts not included).
28' 2" extended Height
This Item Ships LTL Freight ONLY.
Mast Section Dimensions are:
(1) 10'0" length x 1.25" O.D. (16 AWG)
(2) 9'10" length x 1.50" O.D. (18 AWG)
(3) 9'04" length x 1.75" O.D. (18 AWG)
Installation Guidelines:
- Installation or dismantling of telescoping masts require professional contractors experienced with guyed masts.
- All installations must be bracketed or guyed.
- The pictured guy wire kit layouts are for a typical installation. Individual installation requirements may vary.
- Antenna load (top load) should not exceed an effective projected area (EPA) of 2 square feet (see your antenna specifications).
Download
Telescopic and Antenna Mast Wall Brackets 18 inch Standoff Y Style for 1.25 to 3.00 inch OD Mast
- $28.40
