3S-10P PC Based Solar Powered Obstruction Light for Communication Towers
3S-10P PC Based Solar Powered Obstruction Light for Communication Towers
3Starinc’s 3S-10P solar obstruction light is a type of light that is used to warn aircraft and other vehicles of obstructions in their path, such as tall buildings, towers, or other structures. These lights are typically installed on top of the obstruction and are designed to be highly visible, even in low light conditions.
One of the key advantages of using solar obstruction lights is that they are powered by solar energy, which makes them environmentally friendly and cost-effective. This means that they do not require a constant power source and can be easily installed in remote or off-grid locations.
It design for High-rise building marking,Road obstruction marking, Port, dock entrance & walkway,mast, tower, other potentially hazardous obstructions to air traffic. Compare 3S-10P ,it use more economical plastic base,reduced material and transportation costs.
Functions & Features
• Based on LED technology, and its color complies to IALA Recommendations E-200-1.
• With birds pike.
• Optional GPS synchronization function
• Dip switch for fixed type to flashing changeable(16 codes)
• Both NO and NC dry alarm contacts are available, and it will give an alarm in case of power and light failure(optional).
Applications
• Telecomm tower
• Radio tower
• Wind turbine
• Smoke stacks & chimney
• Tall building
• Crane
• Power transmission line
Specifications:
|
Description |
Parameter |
|
International standard |
ICAO Annex 14, Volume 1, 4th Edition, July 2004 FAA Advisory Circular AC150/5370-2F
|
|
intensity |
>10cd |
|
Nominal Night Range |
>4km |
|
Available colors |
Red, amber, green, blue, white |
|
Vertical degree |
10 ° |
|
Horizontal degree |
360 ° |
|
Light source |
LED |
|
LED life |
≥100,000 hrs |
|
Autonomy |
Flashing:200Hours/Steady:100Hours |
|
On/off level |
70/100 lux |
|
Flashing Pattern |
40FPM default (can be preprogrammed to a specified flashing rate upon customer request) |
|
Solar module type |
Multicrystalline |
|
Output |
1.8 Watts |
|
Battery type |
High grade NiMH-Environment friendly |
|
Battery capacity |
3.6V/8 AH |
|
Integrated housing |
UV resistance PC |
|
Waterproof |
IP67 |
|
Weight |
1.5KG |
|
Ambient temperature |
-40℃ ~ +55℃ |
|
Dimensions |
215.5mm H, 226mm Diameter |
|
Warranty |
5 years for light 2 years for NiMH battery |
Download
Telecommunications Tower Paint
The FAA has established recommendations for antenna tower painting and lighting in the Federal Code Advisory Circular 47 CFR Part 17. While these are just recommendations the FCC has been given the authority by Congress to make them requirements. According to these requirements, a tower must be lighted or painted if its height exceeds 200 feet or if it is deemed an aviation hazard in any way. For example, short towers that are near airports must be painted or lighted.
Cut your installation costs with Our No Prime Tower Paint, perfect for use on untreated galvanized surfaces. Tower White and Tower Orange are protective coatings formulated with a vinyl/acrylic emulsion resin providing long-term protection and performance. These Tower Paint coatings offer excellent resistance to weathering, ease of application and freedom from fire hazard. This Tower Paint meets FAA regulations for color coding transmission towers. (Federal Standard No. 595 Colors, 12197 and 17875)
Antenna Tower Lighting and Marking Links
- FCC Antenna Tower Lighting and Marking Requirements.
- FCC TOWAIR Determination - Calculator to determine if a structure at a particular location must be registered.
- 47 CFR Part 17 - Construction, Marking and Lighting of Antenna Structures.
- FAA Advisory Circular AC 70/7460-1M - With Examples of obstruction painting and lighting patterns.
