Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
ProductQtyPrice
Six Port Keystone...1$1.05
3 Foot Tripod...2$31.50
3 inch wall...3$12.95
EZ TM-40-U...1$139.95
ROHN 4 inch...15$39.00
18 inch Deluxe...2$26.95
50 FT RG11...7$35.00
3/16" Down...1$0.99
ROHN 25G Tower...1$205.00
ROHN 25AG 45AG...3$49.00
ROHN 25G 10...4$334.00
ROHN 25G Thrust...1$78.00
225 FT RG11...11$99.00
ROHN 18 inch...21$86.00
30 inch Telescopic...15$24.95
75 FT RG11...5$45.00
3 Foot Tripod...1$36.88
24 inch Telescopic...3$34.75
ROHN 25G Tower...3$1,985.00
7/16 inch Heavy...1$3.95
ROHN 24 inch...16$88.00
18 inch Telescopic...14$28.40
ROHN 25G Tower...2$101.00
12 inch Deluxe...2$19.95
ROHN 45G 55G...2$290.00
Complete Grounding...18$32.00
ROHN 12 inch...15$84.00
RG6 Underground...1$38.00
ROHN Universal...13$70.38
30 Foot Telescopic...2$206.00
Concrete Base...1$14.95
ROHN 25G Accessory...3$74.00
Telescopic...70$164.00
ROHN 6 inch...1$39.00
4 inch Heavy...20$11.95
Telescopic...15$117.00
12 inch Telescopic...15$23.50
ROHN 65G Tower...1$734.00
Rohn RSL Tower...13$372.00
ROHN RSL 100...15$6,636.00
ROHN 65G 20...2$3,582.00
Rohn RSL RGKG...9$430.00
ROHN RSL TOWER...5$33.00
ROHN 55G 40...1$2,005.00
ROHN TUF TUG...7$335.00
125 FT RG11...8$59.00
Rohn RSL Tower...19$156.00
5' Foot X 1...19$16.30
ROHN Bolt Kit...2$14.95
Rohn RSL Tower...13$1,345.00
RG11 Tri-Shield...1$129.95
50 Foot Telescopic...15$282.00
FAM-16 dB In...1$2.25
Rohn RSL Tower...12$3,710.00
HOLLAND 16...1$2.65
Rohn RSL Tower...10$1,150.00
ROHN 45G 55G...3$156.00
Rohn RSL Tower...11$58.00
Rohn RSL Tower...7$196.00
Turnbuckle...3$3.05
ROHN Lightning...12$145.00
3 Foot Roof...1$54.00
Signal Vision...1$1.25
ROHN H50 Telescopi...65$189.00
Rohn RSL Tower...9$1,540.00
5' Foot X 1...2$16.00
ROHN 65G 10...2$1,250.00
EZ TM-50-U...18$164.00
ROHN TUF TUG...1$325.00
TTRSL100 Safety...16$850.00
ROHN 25G 45G...1$316.00
ROHN 25G Tower...1$166.00
Rohn RSL Tower...10$625.00
ROHN 18 inch...3$47.00
ROHN 65g Top...3$319.95
ROHN 55G Complete...1$16,265.00
EZ32A Telescopic...13$21.95
Dual Port Coaxial...2$1.65
ROHN 65G 20...2$1,668.00
Rohn RSWGB...10$260.00
EZ32 Telescopic...10$14.95
RASK12 Accessory...12$296.00
Rohn RSL Tower...11$310.00
BNC Male to...2$1.90
Rohn RSL Tower...11$60.50
RASK34 Accessory...1$425.00
ROHN 25G Adjustabl...1$186.00
4 inch W type...3$10.95
ROHN 25G Anti...1$598.00
ROHN 25G Torque...2$350.00
EZ32C Telescopic...11$24.95
ROHN RSL 100...6$6,090.00
ROHN 45G Self...3$595.00
ROHN 45G Tower...1$1,100.00
100 FT RG11...6$55.00
ROHN 55G Tower...1$420.00
53" X 2.00"...6$17.95
PPC EX6 PLUS...1$0.24
ROHN 25G 10...3$156.00
50 Foot Telescopic...7$325.00
ROHNJACK G...3$329.00
EZ46-3 Pitch...2$3.95
ROHN 65G 20...2$2,600.00
RG11 RG7 RG6...3$24.95
EZ19B Roof...2$18.08
#12 Solid Copper...2$24.95
Rohn RSL Tower...10$345.00
Telescopic...20$120.00
ROHN 45G 10...3$570.00
PPC EX6XL PLUS...2$0.26
Broadband Digital...1$26.95
ROHN Universal...1$595.00
ROHN 8 inch...13$79.00
HOLLAND 12...2$2.65
ROHN Tower...6$38.00
Dual Port Coaxial...3$1.30
ROHN 55G Tower...3$1,350.00
24 inch Deluxe...14$34.95
"Y" Style Chimney...1$17.50
HOLLAND 9 dB...1$2.65
ROHN 45G Tower...1$204.00
ROHN BGK2G...1$89.00
LNS5010 Black...1$39.95
Rohn RSL Tower...10$592.00
LNS5000 Big...2$67.95
ROHN 45G 45...1$2,150.00
ROHN 25G 45G...3$210.00
Holland HPF...1$2.45
ROHN 25G Top...1$264.00
ROHN 45G Tower...2$425.00
ROHN 25G Top...2$298.00
24 dB 1 GHz...1$2.65
PPC EX6WS AquaTigh...1$0.28
ROHN 8 inch...1$47.00
ROHN 45G 20...1$915.00
FAM-3 dB In...1$2.25
3S60 620 Plastic...1$108.00
EZ46-3PO Pitch...3$1.90
ROHN 65G Tower...1$425.00
ROHN 55G Tower...2$332.00
3x Cat6 + RG6/U...1$439.95
ROHN 65G Adjustabl...2$745.00
Cat6 UTP 550...1$1.30
3 dB Power...1$3.65
4 inch TV Antenna...1$12.00
ROHN 65G Section...2$84.95
ROHN Universal...1$695.00
Non-Penetrating...3$115.00
RG6 RG59 RG58...2$8.95
10" - 23" FLAT...1$37.00
20 Foot Telescopic...1$158.00
16 dB 2 Port...1$2.89
EZ60 620 Plastic...1$7.95
ROHN 55G Tower...1$778.50
4 inch W type...1$10.95
8' Foot X 1...2$27.95
HOLLAND HDA...2$189.95
ROHN 25G Adjustabl...1$203.00
ROHN 25G Tower...1$79.00
Non-Penetrating...1$17.00
10' Foot X...1$27.95
Rohn RSL Tower...1$462.00
ROHN 25G Tower...1$97.00
ROHN 65G 10...2$1,908.00
ROHN 25G 60...1$1,780.00
PLA1000 F Connecto...2$49.95
ROHN Leg Mounted...1$165.00
ROHN RSL 100...1$6,400.00
EZ48 48" Single...1$32.95
ROHN 45G 55G...1$745.00
RG11 RG7 RG6...1$12.95
ROHN 45G 35...1$1,715.00
Thomas and...1$0.35
27 dB 1 GHz...2$2.65
LNS5082 RG6...1$27.95
Adjustable...1$8.95
45G Main Straight...1$13.95
1/4" Down...1$1.20
ROHN 65G 10...1$1,695.00
Coaxial Cable...1$1.95
3 inch HDG...1$13.95
HOLLAND 2-Way...1$1.60
Cat6 Shielded...1$389.95
ROHN 45G Tower...1$162.00
DC Voltage...1$1.95
618 Telescopic...1$134.00
Gripple Tensioning...1$87.00
VMP FP-XMWAB...1$112.38
BNC Female...1$1.55
Channel Master...1$1.40
EZ60A 620 Steel...1$82.95
RG11 Quad Shield...20$154.95
HOLLAND LA...1$11.95
3S100D LED...1$290.00
Goods Total975$427,721.33
View Cart Check out
Printer View Tell a Friend

3S100D LED Based Low Intensity Obstruction Light Double

× 3S100D LED Based Low Intensity Obstruction Light Double was added to your Shopping Cart.
Price$290.00
Manufacturer Code3S100D
Qty
AvailabilityShips in 1 to 3 Days

Highlights

LED light source ensures long life
Low power consumption
Shock and vibration resistant
Corrosion resistant
UV stable polycarbonate housing
Ease of mount, mount accessories available
5 years warranty
Special optical design provides better light distribution

Bulk Quantities Available Here!

3S100D LED Based Low Intensity Obstruction Light for Communication Towers

3Starinc’s 3S100D LED Dual Low Intensity Obstruction Light series is a 100cd (candela) LED light designed for airway fixed obstacle marking application. It comply with ICAO & FAA regulation. It is integrated by 2 single lights. For making sure there is always a light working atop of the tower. Two optional working patterns can meet different area’s customers:
Service+Standby: Only one service light is working normally. It will auto-transfer to standby light in case of service light failure.
Service+Service: Two single lights work simultaneously. Either failure will not affect the other normal working.
Uses constant current LED driver IC, Compared with similar products, constant flow effect is good and the service life is longer.

Features
• Common relay alarm,can work independently or by controller.
• Special optical design provides better light distribution
• LED light source esures long lifetime, maintenance free
• Low power consumption
• Shock and vibration resistant
• Corrosion resistant and UV stable polycarbonate housing
• Ease of mount, mount accessories available
• Available both in single and double type
• 5 years warranty

Applications
• Telecomm tower
• Radio tower
• Wind turbine
• Smoke stacks & chimney
• Tall building
• Crane
• Power transmission line

Standards
• ICAO Annex 14, 4th Edition, July 2004
• ICAO low intensity, type B
• FAA AC No. 150/5345-43F, 2006
• FAA type L810
• DGAC USA /Mexico

Specification Sheet
Specification
Rate this product.
Product isn't rated yet. Write a review.

This taken from the FCC:

Antenna Tower Lighting and Marking Requirements

The FCC has been given the authority by Congress to require the painting and/or illumination of antenna towers when it determines that such towers may otherwise constitute a menace to air navigation. 47 U.S.C. § 303(q). The FCC's rules governing antenna tower lighting and painting requirements are based upon the advisory recommendations of the FAA, which are set forth in two FAA Advisory Circulars. 47 CFR §§ 17.21-17.58. Although the FAA's lighting and painting standards are advisory in nature, the FCC's rules make the standards mandatory. The standards and specifications set forth in these FAA documents are incorporated by reference into the FCC's rules, making these advisory standards mandatory for antenna towers.

 

The FCC always requires an FAA determination that an antenna tower will not pose an aviation hazard before it will grant permission to build that antenna tower. Information required on the FCC construction permit form advises the FCC staff as to whether such a tower location or height is involved. The FAA's determination takes into consideration the location and height of the proposed tower, and its safety lighting and marking.

 

Each new or altered antenna tower structure registered must conform to the FAA's painting and lighting recommendations set forth on the structure's FAA determination of "no hazard," and must be cleared with the FAA and filed with the FCC. If the FAA determines that the tower would be a physical hazard, the FCC will not approve the construction permit application. (When, however, the FAA determines that there is an aviation hazard due to possible radiofrequency interference with aviation communication signals, the FCC makes an independent analysis of who will be responsible for resolving possible conflicts, and may not automatically defer to the FAA determination as to what party should bear the cost of any needed equipment changes.)

 

The FAA advisory circulars set forth detailed specifications for lighting and painting. If, however, the FAA's standards allow more than one lighting or painting option for a particular structure, the person seeking FAA clearance for a tower may indicate on FAA Form 7460-1m which of the specified types of marking and lighting systems is desired. With respect to telecommunications towers, the most common option approved by the FAA is the substitution of white flashing lights for a combination of red lights and painting. Any preferences or requests for deviation from standards must be submitted to the FAA regional office which services the area where the structure would be located. The FAA regional office conducts an aeronautical study of the safety of the structure and will consider the proposed deviations or preferences in conducting its study. The FAA considers any preferences or requests for deviation from its standards as part of its aeronautical study.

 

Where the FAA approves the substitution of high intensity white lights for a combination of red lights and painting, and the antenna tower is located in a residential neighborhood, the Commission requires the applicant to prepare an environmental assessment. 47 CFR § 1.1307(a)(8). The Commission, upon review of the environmental assessment, may determine that the proposed substitution of high intensity white lights would not have a significant impact, and may process the application without further review. 47 CFR § 1.1308(d). If, however, based upon a review of the environmental assessment, the Commission determines that the proposed high intensity lights would have a significant environmental impact upon the human environment, the Commission will inform the applicant. The applicant will have the opportunity to amend its application to eliminate the environmental problem. If the problem is not eliminated, the Commission will publish in the Federal Register a Notice of Intent that an Environmental Impact Statement be prepared. 47 CFR § 1.1308(c). The Commission may, to assist in the preparation of an Environmental Impact Statement, request further information from the applicant, interested persons and other agencies or authorities. The Commission may also direct that objections to the proposed lighting be raised with the appropriate state or local authorities. 47 CFR § 1.1314(d).

 

As part of the its aeronautical study, the FAA may, if it considers it necessary, solicit comments from or convene a meeting of all interested persons for the purpose of gathering all facts relevant to the effect of the proposed construction on the safe and efficient utilization of the navigable airspace. See 14 CFR §§ 77.35, 77.41-77.69. The FAA regional office forwards its recommendation to FAA headquarters in Washington for final approval. The final FAA determination also must be submitted to the FCC with any antenna construction permit application that requires FAA notification. These structures will be subject to inspection and enforcement of marking and lighting requirements by the FCC.

 

Although there is no absolute height limit for antenna towers, both agencies have established a rebuttable presumption against structures over 2,000 feet above ground level. The FCC has a policy that applications filed with the FCC for antenna towers higher than 2,000 feet above ground will be presumed to be inconsistent with the public interest and the applicant will have a burden of overcoming that strong presumption. The applicant must accompany its application with a detailed showing directed to meeting this burden. Only in the exceptional case, where the Commission concludes that a clear and compelling showing has been made that there are public interest reasons requiring a tower higher than 2,000 feet above ground, and after the parties have complied with applicable FAA procedures, and full Commission coordination with FAA on the question of menace to air navigation, will a grant be made. See 47 CFR § 1.61 Note.

 

The FAA presumption against construction of structures over a certain height is set forth in the FAA rules. A proposed structure or an alteration to an existing structure that exceeds 2,000 feet in height above the ground will be presumed to be a hazard to air navigation and to result in an inefficient utilization of airspace and the applicant has the burden of overcoming that presumption. Each notice submitted under the FAA rules proposing a structure in excess of 2,000 feet above ground must contain a detailed showing, directed to meeting this burden. Only in exceptional cases, where the FAA concludes that a clear and compelling showing has been made that it would not result in an inefficient utilization of the airspace and would not result in a hazard to air navigation, will a determination of no hazard be issued. See 14 CFR § 77.17(c).

Antenna Tower Lighting and Marking Links