5' Foot x 1.25" inch OD 16 AWG Hot Dip Galvanized Antenna Mast Pole | ROHN 160505PHS
ROHN
Made in the USA!
This 5 Foot (60") by 1.25" OD 16 AWG Medium to Heavy Duty Antenna Mast tube is Hot Dip Galvanized (HDG) for Extreme Weather Resistance and adds a layer of zinc in the process which may make fitment difficult with other pre-galvanized (Non-HDG) Swaged-end Masts. If you are Looking to increase height by multiples of 5 foot using HDG 16 AWG masts, we recommend that you use the ROHN 5-16S Swaged-end HDG Masts solely, which are notched on the receiving end in addition to being swaged on the other for stacked fitment with another swaged section.
Be Sure and afford yourself 2 feet minimum, up to 1/3 of the overall mast length between the two wall mounts you would utilize in your TV antenna Installation. The Torque applied from wind load through cantilever to these mounts can be significant.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)
ROHN Monopole Towers
GENERAL USE:
ROHN Direct Embed Poles minimize site requirements, lowering lease rates and acquisition costs. They are designed for rapid installation, meeting the demands of today’s dynamic communication environments. Whether you are supporting broadband, PCS, security or other lightweight systems, ROHN Tapered Steel Poles offer extremely efficient designs.
FEATURES:
• Completely hot-dip galvanized after fabrication
• Fast, easy installation
• Designed for applications with stringent deflection requirements
• Internal routing of transmission lines
• Each pole ships with the following:
Assembly Drawings and Standard Foundation Details
(4) 5” x 7” Ports with (2) port covers
(3) Jacking Lugs on each side of splices
(3) Ground attachment clips
(1) Vented cap plate
(1) Bearing plate welded to bottom
Safety Climb Support Brackets
(1) Safety warning sign
(1) Pole ID tag
Attachment clips for optional step bolts
• Optional items are available and may be ordered separately.
• Custom designs available for any height or application.
Per Rev G requirements, any structure greater than 10’ requires a climber safety device.
