Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

Rohn 5/8TBE&E Turnbuckle 5/8 x 12 inch Round Eye to Eye

Price$165.00
Manufacturer CodeR-5/8 TBE&E-12
Qty
AvailabilityUsually ships in 24 Hrs

Highlights

Heavy Duty
3500 lbs. Working Load Limit
17,500 lbs. Ultimate Strength
HDG Weather Resistant

Bulk Quantities Available Here!

ROHN R-5/8 TBE&E-12 Turnbuckle for Tower Down Guy 5/8" x 12" Round Eye to Eye
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Galvanized, Round Eye, Open Body, Working Load Limit: 3500 lbs. Ultimate Strength: 17500 lbs.

FEATURES
Turnbuckles are used as adjustable extension links to maintain proper tower clearance on assemblies at tower end. The body of the turnbuckle is reverse thread on opposite ends to allow tightening/loosening by simply turning the body of the turn buckle. Made of galvanized steel, our turn buckles are built to last and weather resistant .

SPECIFICATIONS

 Item#
 5/8" TBE&E
 Product Name
 Turnbuckle, Eye and Eye, Galvanized, 5/8" x 12"
 Type
 Eye and Eye
 Diameter
 5/8 "
 Take-up
 12"
 Closed Length
 16"
 Working Load Limit
 3500 lbs. (5 to 1 Safety Factor)
 Material
 Forged Steel
 Finish
 Hot Dip Galvanized
 Specification
 Federal Spec FF-T-791B Type 1 Form 1

 

Typical Use: For attaching and tensioning ROHN Tower Down Guy Terminations when utilizing 3/16" Strand (via 3/16" Pre-formed Dead-End with 5/16" Thimble or 3/16" Cable Clamps with 3/16THH Thimble), 1/4" Strand (via 1/4" Pre-formed Dead-End with 5/16" Thimble or 1/4" Cable Clamps with 1/4THH Thimble), 5/16" Strand (via 5/16" Pre-formed Dead-End with 7/16THH Thimble or 5/16" Cable Clamps with 5/16THH Thimble), and 3/8" Strand (via 3/8' Pre-formed Dead-End with 1/2THH Thimble or 3/8" Cable Clamps with 3/8THH Thimble) through One Eye, with the Other Eye bolted through while "Sandwiched" between Dual Equalizer Plate Anchor Assemblies such as the GAC305, EP25345 or GAC303, EP25343.
Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.

Specification Sheet
Spec. Sheet

Antenna Guy Wire for Guyed Towers & Telescopic Masts

3 Star Stocks EHS 7 Strand Guy Wire for use on ROHN 25G, 45G, 55G and 65G Guyed Towers Systems as well as Utility OSP Cabled and Fiber Systems. Our EHS Tower Guy wire comes in 100', 250', 500',1000, in coils or reels and 5000 FT wooden spools. PLP-GWD Guy wire Dispenser available (optional). It is recommended that "Initial Tension" (10% of Maximum Limit) is attained with the Turnbuckle travel extended prior to tensioning with same. Annex the Data shown in the Table below when referencing guy charts shown for ROHN Towers:

 

 Size
 Grade
 Tensile Strength/lbs.
 Initial Tension/lbs.
3/16"
HS
2850
300
3/16"
EHS
3990
400
1/4"
HS
4750
500
1/4"
EHS
6650
700
5/16"
HS
5350
550
5/16"
EHS
11200
1100
3/8"
HS
10800
1000
3/8"
EHS
15400
1500

 

Our 6/18 (6 strand 18AWG) and 6/20 (6 strand 20AWG with or with out Plastic Coating) guy wire comes in lengths of 50', 100', 250', 500' up to 1000' FT. Choose from 6/18 and 6/20 for Guying Telescopic Antenna Masts. Also, Complete Telescopic Guy Wire Kits are also available.

Products   Recently Viewed