VMP Antenna Mast Roof Mount 60 Inch Tripod for TV Wireless Internet Starlink
VMP
The VMP TR-60 Antenna Mast Roof Mount 60 Inch Tripod for TV Wireless Internet Starlink holds mast up to 2.00 inch O.D., includes a pitch pad kit, a universal mast clamp and has installer friendly front facing feet with outer legs lining up at 48 inches (3 x 16) and the center leg at 24 inches from either outer leg. (Mast Not Included)
This Penetrating Mount Series from VMP is finished with a dark brown weather resistant powder coat inside and out that blends well with residential environments. This Mount as a Base can accommodate Masts up to 2 inches in Diameter. Typical rafter spacings are 16 inches center to center and pre-built trusses are 24 inches center to center. Large Mast and Antenna Loads should be additionally supported by Guy wires to reduce Wind Load leverage against the Base. And as with all items in this Product Line, Screws and Pitch Pads are included.
Audio Video TV Keystone Jack Inserts
Keystone Video and Audio Inserts incorporate HDMI, RCA, F, BNC and other Popular Connections in Combinations for Installing In Home Theater and Surround Sound Entertainment Applications.
A Keystone module is an industry standard type of wall jack used in residential and business environments. The system consists of a modular face plate to which jacks are mounted. Flush mount Keystone Wallplates will fulfill the most complicated station installation requirements through a wide selection of snap-in modules. A variety of jacks and connectors will fill the wall plate openings to meet your specific requirements of voice, data, audio, video, fiber optic, etc. The inserts are a snap to install and remove, giving you a highly adaptable system.
A keystone jack module is a standardized snap-in package for mounting a variety of low-voltage electrical jacks such as TV, Phone, LAN, Data, BNC, RCA or optical connectors into a keystone wall plate, surface-mount box, or a patch panel. Keystone modules have a commonly popular standardized rectangular face of 14.5mm wide by 16.0mm high and are held in place with a flexible tab. This allows them to be snapped into or out of a mounting plate with correspondingly-sized rectangular holes, called ports. All keystones, regardless of the type of jack they carry, are interchangeable and replaceable. This is what makes Keystone a popular choice in today's installations at Home or Office. Some keystones use a pass-though type connector, where there is a jack on both the front face as well as the rear side. Others only have a jack on the front and employ a different means for hard-wiring signal cables in the rear, such as a mini 110, insulation-displacement connector, crimp or solder connection.
