8' Foot x 2.00" inch OD Aluminum Tubing Antenna Mast Pole Pipe | UV-2-8
Universal Towers
Made in the USA!
This is a 8 Foot (96") by 2.00" OD, 0.125 inch Thick Wall, Aluminum Tubing Antenna Mast Pole
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)
Pre-Galvanized Steel Mast | Aluminum Mast Tube & Hot Dipped Galvanized Steel Pipe
3 Star Inc offers a complete line of Antenna Masts made from Pre-Galvanized Steel of 18 and 16 Gauge wall thickness of 1.00", 1.25", 1.50", 1.66" and 2.00" OD, offered in 4, 5, 8 and 10 foot lengths with both uniform and swaged fitment. They are the Mainstay of Mast poles utilized in Residential and Commercial markets from Off-Air TV, Cell repeater and Wireless Internet Gateway to IoT, Weather Instrumentation and on Property Network Links.
Our Aluminum Mast Poles come in 1.25", 1.50" and 2.00" OD, and lengths of 6, 8, 10 and 16 feet for use on Aluminum Towers as Pinnacle Masts, Residential and Commercial Installations of Wall and Roof mount Starlink Terminals and Scada Remote Telemetry.
We Stock Hot Dipped Galvanized Steel Pipe,offers to meet a variety of communication tower needs such as Cellular, PCS, Wireless Cable, Microwave, Wireless Internet, WiFi Hot Spots, DBS, MDS, MMDS and UHF/VHF reception. Galvanization provides a protective zinc coating that prevents rust and corrosion from water or moisture over time.
Selecting Antenna Mast Pipe
Selecting the proper antenna mast pipe is crucial. Depending on the size of your antenna, it's EPA, weight and height all play a factor in selecting a supportive pole. When planning, it's best to have all the information you can get like outside diameter of your attaching method, the clearance of gutters, siding or other obstacles in the path of your erecting a mast or tower.When selecting a pipe you will need to know the length, OD (outside diameter), whether the AWG is 16 or 18 (the smaller the number the thicker the steel) and whether you'll need any swaged ended pieces. You'll then need to select the proper mounting such as wall, roof or maybe a tripod mount
Here you will find standard straight pipe in 5' foot and 10' foot lengths. You can also find those same pipes with a special end called a swage. A swaged ended pipe allows you to attach several lengths of pipe together.
ROHN Swaged Masts are Designed for stacking with a Notch and Swage Feature that prevents twisting of one mast section to the other without a set screw.(as shown below)
| Swaged End | Straight End |
 |
 |
