EZ19B Heavy Duty Base for Antenna Roof Mount fits up to 2.50" OD Mast Pole
Easy Up
Made in the USA!
This EZ19B Heavy Duty Antenna Roof Mount Base is for Installation of Telescopic or ANY Antenna Mast Pole 1.50" to 2.50" in Outside Diameter on a Flat, Pitched or Peaked Roof. This Heavy Duty Range Base is comprised of Galvanized 16 gauge steel Swivel Feet that conform to Peak or Pitched Roof contours allowing the Mast to be Raised and Lowered in place, secured with a galvanized 16 gauge 2-3/4" ID Collar and (2) Double Nut set screws.
(Mounting Hardware and Pitch Pads Not included)
Mast will require Down Guys to remain in place against wind-load.
Will Also Accommodate Telescopic Masts:
ROHN H40 H50 and Easy Up TM-40 TM-50
Specifications:
Accepts Mast up to: 2.50" OD
Collar Size: 2-3/4" ID
Weight: 2.50 lbs.
We are so Happy to have This Universal Peak Ridge and Flat Roof Mount for Telescopic Push-up Antenna Masts for masts up to 2-5/8" Diameter (which is every Brand and Model we can think of) Of all the Models we've evaluated to date, this one is the Best. It starts with a 16 gauge shaped, rolled, seamed Tube stock that has a recessed channel for the inside set of retaining set screw nuts. All of the Hardware is Galvanized and is of a Heavy Duty Nature. The Hinges are also 16 gauge and Hardy Stuff. Matter of Fact, this Mount will be Harder than most Masts, you will probably want to procure a 6 inch section of Black Iron Pipe to place on the inside of the bottom section of the antenna Mast to keep it from Collapsing, as the Double Nut Set Screws do not give. The Bottom Main Assembly Bolt also doubles as the 3rd Hinge which facilitates swinging the Mast up or down from Vertical for Erection and Maintenance. As with all Masts, Guy wire support and Grounding are Critical to Antenna Survival.
Download
The most Popular Connector Series from Manufacturers like PCT, PPC, F-Conn, Thomas and Betts, Holland Electronics, Apica and Digicon offered in Legacy Hex Crimp styles as well as the Newer Radial Compression formats. Be Sure and match Connectors to their respective Crimping Tools by Manufacturer Spec. Sheet for Hex Diameter size or Compression length. Coaxial Cable Connectors should be weather protected in outdoor use, and some connectors provide extra moisture migration protection when compared to others. Though the economics of Old school Hex Crimp connectors and Tools may be attractive at first, over the long haul, compression connectors offer greater Shield Connection integrity, Bandwidth, Interference Rejection and Impedance matching when compared to their Hex Crimp counterparts. Whenever possible, upgrade Coaxial Cable, Connectors, Splitters and Amplifiers to ensure compliance to the latest specifications and formats.
