Your Cart

Product	Qty	Price
Telescopic...	5	$120.00
EZ32C Telescopic...	2	$24.95
ROHN 18 inch...	2	$86.00
CAT6 Direct...	1	$289.95
Rohn RSL Tower...	1	$1,150.00
ROHN 45GSR...	1	$1,150.00
Rohn RSL Tower...	2	$60.50
Frequency Agile...	1	$27.95
EZ46-3PO Pitch...	1	$1.90
ROHN RSL TOWER...	1	$33.00
Non-Penetrating...	1	$131.00
5' Foot X 1...	2	$16.30
ROHN 12 inch...	6	$84.00
ROHN 18 inch...	1	$47.00
Rohn RSL Tower...	1	$372.00
Rohn RSL Tower...	1	$310.00
53" X 2.00"...	1	$17.95
Dual Port Coaxial...	1	$1.30
12 inch Telescopic...	2	$23.50
18 inch Telescopic...	3	$28.40
EZ TM-50-U...	2	$164.00
ROHN 65G 20...	1	$2,600.00
ROHN TUF TUG...	2	$335.00
3 inch HDG...	1	$13.95
ROHN 55G Tower...	1	$420.00
EZ32 Telescopic...	3	$14.95
ROHN RSL 100...	2	$6,636.00
30 dB 1 GHz...	1	$2.65
Rohn RSL Tower...	1	$1,345.00
EZ32A Telescopic...	2	$21.95
Rohn RSWGB...	1	$260.00
Commscope RG11...	1	$230.00
ROHN 4 inch...	3	$39.00
J Pipe Adapter...	1	$9.95
50 Foot Telescopic...	2	$282.00
ROHN Universal...	1	$70.38
ROHN H50 Telescopi...	5	$189.00
4 inch Heavy...	1	$11.95
Rohn RSL Tower...	1	$156.00
1/4 inch Heavy...	1	$1.15
30 inch Telescopic...	2	$24.95
ROHN RSL 100...	3	$6,090.00
ROHN 24 inch...	2	$88.00
ROHN Lightning...	3	$145.00
Rohn RSL Tower...	2	$625.00
Rohn RSL Tower...	1	$3,710.00
27 dB 1 GHz...	1	$2.65
ROHN 65G Tower...	1	$734.00
BNC Male to...	1	$1.55
ROHN 45G/55G...	1	$558.00
ROHN TUF TUG...	1	$325.00
ROHN 45G 55G...	1	$290.00
Holland HPF...	1	$2.45
TTRSL100 Safety...	1	$850.00
Telescopic...	10	$78.00
ROHN Bolt Kit...	1	$14.95
Complete Grounding...	1	$32.00
Rohn RSL Tower...	1	$196.00
DC Voltage...	1	$1.95
ROHN 25G Tower...	1	$97.00
Rohn RSL RGKG...	1	$430.00
Rohn RSL Tower...	1	$592.00
Rohn RSL Tower...	1	$345.00
EZ19B Roof...	1	$18.08
RG11 RG7 RG6...	1	$24.95
ROHN 25G 60...	1	$1,780.00
50 FT RG11...	1	$35.00
HOLLAND 8-Way...	1	$9.95
Goods Total	113	$57,260.96
View Cart Check out

HOLLAND 4-Way Horizontal Splitter 5-1000 MHz. -W- Ground

View Larger Image

Price$3.60

Manufacturer CodeGHS-4

Qty

Add to Cart View Cart Check out Shipping Calculator

AvailabilityUsually ships in 24 Hrs

ShippingCan ship Canada

Highlights

5-1000 MHz. Bandwidth

45 dB port-to-port isolation*

35 dB output return loss*

Low intermodulation design

Double-Thick Plating

Enhanced Sub Band Performance

Capacitor Decoupled

6 kV Survivability

100% soldered backplate

Flat End F-ports

*(Return Band)

HOLLAND GHS-4 4-way Horz. Splitter 5-1000 MHz. with Ground.
Low intermodulation design and optimized return band prevents high cable modem signals from affecting forward band transmission. Therefore, the GHS-4 series digital splitter is ideal for present and future multimedia applications including video, telephony, and transmission sensitive digital signals such as QPSK and QAM data. Ideal for digital and cable modem applications with high surge resistance and unique plating for unmatched corrosion resistance to withstand harsh environments.

Spec. Sheet

Rate this product.

Product isn't rated yet. Write a review.

4-Way Splitters are typically the Part you would use to take One (1) cable Feed and "Split" it into Four (4) in order to Provide Signal to 4 Independant Devices, or Three More Cables to complete the Run(s) to their Final Destination(s). Please be Sure to Select the Appropriate Splitter not just By Manufacturer and Price. But Rather, Consider the Specifics of Bandwidth, Packaging (Indoor vs. Outdoor), Loss, Powering Requirements Up/Down-Stream and the Overall Needs of the Final System You Wish to Create...

If you are adding a splitter to an existing Cable TV or Antenna feed, you may need to compensate for the loss that you are about to introduce. The gain of a Line Amplifier should be selected to zero out the loss that follows it. In other words, if you have fifty feet of cable and a two-way splitter, then a 10 db amplifier will be fine. Conversely, if you have an eight-way splitter and hundreds of feet of cable, you will need an amplifier with a higher gain. Just as in the case of a Pre-Amplifier, however, bigger is not always better.

Commensurate with Coaxial Cable TV Antenna Splitter Installation, you want to Ground your Cable TV or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your TV and Entertainment Electronics. The Integral Grounding Block designed onto every Outdoor Use Compatible RF Signal Splitter we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.