Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools

My Cart

Your shopping cart is empty!

Holland G-F811 F-81 Barrel Connector

Price$0.29
Qty
1-9
10+
Price
$0.29
$0.25
Manufacturer CodeG-F811
Qty
AvailabilityUsually ships in 24 Hrs
ShippingCan ship anywhere
Highlights
3 GHz Operation
Lower Insertion Loss
High Return Loss (> 35 dB)
Flat Port Ends (IPS SP 400)
High Holding Force: > 200 grams
Beryllium Copper Seizing Pin
Greater Contact Area

Bulk Quantities Available Here!

Holland G-F811 F-81 Barrel Connector
has advanced the traditional F splice technology with a patented design offering a higher level of electrical and mechanical features. The advanced features provide increased return loss beyond 3 GHz, twice the pin contact area and increased holding force for higher current handling and greater reliability. This F-81 is 11.6 / 10.3 mm. (long side/short side) with a total length of 26.3 mm. DC thru 3 GHz. Use this to connect (splice) two "F" fitted coaxial cable ends together. Use on Satellite TV and Other Critical High Frequency connections.

spec. sheet



Spec. Sheet


Get Adobe Reader




Use this Barrel Connector for Satellite and Critical communications, with a Center conductor pressure up to 4 times stronger than regular barrel connectors. Safe for DC Voltage / Current passing and Frequencies up to 3 GHz.
Rate this product.
Product isn't rated yet. Write a review.

An adapter (or adaptor) is a device used to match the physical or electrical characteristics of two different Connectors so that a connection may be made between them and the Equipment You desire to Cross-Connect. Most Connections for Video and RF (Radio Frequency) Equipment is 75 Ohm in Characteristic Impedance. Radio and Microwave Frequency Connections Passing High Power Require 50 Ohms. A Majority of the Adapters offered Here are 75 Ohm. However, with the High Quality Dialectric Found Surrounding the Interior of the Mating Connection, Low Power Usage, and Transition Impedance Matching of Like Characteristic Impedances, Resulting Mis-match of 50 Ohm use woiuld be so Low as to be Considered Negligible.