3-Way Down Guy Wire Kit for 20 Foot Telescopic Antenna Mast H203WAYGUY

3 Star Inc H203WAYGUY 3-Way Down Guy Wire Kit for 20 Foot Telescopic Antenna Mast
This Kit is a 3-way Down Guy Wire and Anchor package to secure your ROHN H20 and Easy Up TM20 Telescopic Push Up Antenna Masts at 2 levels. Guy wire gauge, Anchor size and Base Mount are Selectable Options. Mast is not included.

Works with the following Telescopic Masts:

ROHN
- H20

Easy Up
- EZ TM-20
- EZ TM-20-U-95

Channel Master
- 1620
- 1820

This Kit Includes the Following: Table (1) – Complete Kit List

H203WAYGUY 20 Foot 3-Way Guy Wire & Anchor Kit
QUANTITY	MANUFACTURER CODE	DESCRIPTION
200 FT	EZ 60 A	6 Strand 20 Gauge Guy Wire
3	EZ 30	30” by 1/2” DIA Screw Anchor w/ 3” Helix
6	61820GRPL	Gripple for 20 and 18 Gauge Guy Wire – 1/8”
6	61820GRPL	Grips to Dead-End and Adjustment of Guy Wire
18	1/8CCF	1/8” Hot-Dipped Galvanized Cable Clamp
1	EZ 32	Standard Baseplate 9” Sq. Plate with Pier Pin

The OPTIONS for this Kit Includes the Following: Table (2) – Options List

OPTIONS
OPTIONS – Guy Wire
200 FT	EZ 60	6 Strand 20 Gauge Plastic Coated Guy Wire
200 FT	618	6 Strand 18 Gauge Guy Wire
OPTIONS – Screw Anchors
3	EZ 48	48” by 5/8” DIA Screw Anchor w/ 6” Helix
OPTIONS – Baseplates
1	EZ 32C	Heavy-Duty Baseplate 9” Sq. Plate w/ 6 inch Collar Includes Pier Pin
1	EZ TS-50	Free Standing, Heavy-Duty Ground Mount 9” Sq. Plate 18” Steel Tube welded (Above) 18 ¾” Rod welded (Below) Holds up to 2 ¼” DIA Mast Includes (2) Set Screws
OPTIONS – Telescopic Mast
1	EZ TM-20-U-95	Telescopic Mast 15’ Fully Extended UPS Shippable

General Information

This 3-Way Guy Wire and Anchor Kit for 20 Foot Telescopic Push Up Antenna Masts.
Includes the accessories needed to SECURELY affix a Ground Based Telescopic Mast at the 2 levels of Guy Rings. (Guy Rings supplied on mast)
The standard Baseplate given is solely used for GROUND Installations.
(This Baseplate does not give, include, or take into consideration of any/alternate modifications; this includes Roof, bracketing, etc)
PLEASE CONTACT A STRUCTURAL ENGINEER or PROFESSIONAL before installing a Telecom Structure.
As with all masts, Guy Wire Support and Grounding are CRITICAL to Antenna Survival.
This Guy Wire Setup can be used with Easy Up, ROHN, and CHANNEL MASTER Telescopic Mast.

General Down Guy Wire Kit Setup Information

Telescopic Mast
Guy Wire

EZ 60A - 6 Strand 20 Gauge Wire

EZ 60 - 6 Strand 20 Gauge Wire (Plastic Coated)

EZ 618 - 6 Strand 18 Gauge Wire

Screw Anchor

EZ 30 - 30” Anchor with 3” Helix Disk

EZ 48 - 48” Anchor with 6” Helix Disk

1/8CCF - 1/8” Guy Wire Clamps (Can be used for 18 & 20 Gauge Guy Wire)
61820GRPL - Gripple Dead-Ends Adjustable Tensioners
Base Plate

EZ 32 - Standard Baseplate (No Collar)

EZ 32A - Heavy-Duty Baseplate w/ 2 inch collar

EZ 32C - Heavy-Duty Baseplate w/ 6 inch collar

EZ TS-50 - Free-Standing Ground Mount

NOTES

Reference the Telescopic Mast ROHN Buyer’s Guide by Height to build or supplement your Telescopic Antenna Mast installation.
3-Way Down Guy Wire Kits are typically used for Ground-Based installations.
4-Way Down Guy Kits are typically used for Roof-Based installations.
Installations that are combination or hybrid and utilize substitution or additional structural components should be forwarded to and engaged by an Engineer qualified to make such decisions.