Print this pagePrint this page

ROHN 25G 30 Foot Self Supporting Tower 25SS030


ROHN 25G 30 Foot Self Supporting Tower 25SS030
Price: $694.00

Options:
GroudingBGK3G x 2 $130.00
Top CapAG $56.00; AG1 $27.00; AG2; AG3 $73.00; AG4 $56.00; AG5 $15.00
Highlights:

Hot Dip Galvanized
Double Bolted Joints
Zig-Zag Rod Bracing
1-1/4" Steel Tubing
Side Rails
12-1/2" Equalateral
Triangular Design
Can be used in:
Self Support Config


Availability: Ships in 1 to 3 Days
Shipping: Can ship only within USA
Weight: 255 lb
Description

ROHN 25SS030 Complete 30 Foot Self Supporting Tower

 

This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Self Supporting 30 Foot ROHN 25G Tower with with EPA's (Effective Projected Area) Ratings for 70, 80 or 90 MPH (No Ice). For more info click on "View Larger Image" above or click here to refer to Allowable Antenna Loading.

 

 

THIS KIT INCLUDES
25SS030
QUANTITY PART NUMBER DESCRIPTION
1 25AG2 Top Cap Tower Section
2 25G 10' Tower Section
1 25AJBK Bolt Kit for 25G Top Section
2 25JBK Bolt Kit for 25G Tower Section
1 SB25G5 5' Base Section
2 BGK3G (OPTIONAL)

Tower Base Grounding Kit

This Kit Includes:

(1) 10' of #4 Copper Wire

(1) 5/8" x 8' Gopper Clad Ground Rod

(1) 5/8" Ground Rod Clamp

(1) 5/16" x 2 3/8" Grade 5 HDG Bolt

(1) 5/16" Hex HDG Nut

(1) Hy-Lug YA4C-L4 Compression Terminal Lug

1 ACWS Anti-Climb Warning Sign
1 ASSEMBLY GUIDE

 

The BGK3G Grounding Kit is an OPTIONAL kit for the ROHN 25G "Self-Supporting" Tower Series.

 

The 25AG2 Top Cap Tower Section is the standard top section for the 25G Tower Series,

but can be replaced with the following options.

 

TOP CAP TOWER SECTION OPTIONS
PART NUMBER DESCRIPTION HEIGHT O.D.
25AG Top Cap 9' 2"
25AG1 Top Cap 9' - 3" 1.66"
25AG2 Top Cap* 9' - 9" 2.25"
25AG3 Top Cap 9' - 3 1/2" 2.25"
25AG4 FLAT Top Cap 8' - 3/16" FLAT
25AG5 Top Cap 8' - 1/2" 2.75"

 

 

This Item Ships LTL Freight ONLY...
Click Here for: What You Want to Know about Shipping!

 


Note:


This 25G Tower is to be used in a Self-Supporting Configuration according to Use and Foundation Specifications.

This Height Configuration relies on a R-SB25G5 Embedded in a Concrete Foundation Specified by Engineering. As a Free-Standing, Self-Supporting Structure, a 70, 80 or 90 MPH rated 25G Tower can rise to a maximum of 40 feet.

Visit our knowledge base for more ROHN 25G Tower Configurations, Foundation and Grounding Detail Information.

 

Self-Supporting Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the weight of the Foundation and the cohesive of the soil to counter Tower tipover, as well as the strength of the tower members to withstand these Forces against them. ROHN Tower Kits are designed based on assumptions made regarding Windspeed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, and/or find the Tower Quote Data Sheet Form by clicking the link that appears on the Footer of this Page Below. *Per Rev G requirements, any structure greater than 10 ft requires a climber safety device.


Specification
Specification Sheet
Specification Sheet PDF DownloadDownload PDF

Images

ROHN_SS_800x900t.jpg
ROHN_SS_800x900t.jpg
 

Accessories