ROHN KH8175A Template and Bolt Kit for 25GSSB Base Plate Installation of 25G Self-Supporting Tower
Made in the USA!
The ROHN KH8175A is a Template and Base Bolts Kit used in preparation of a freshly poured concrete pad installation of the ROHN 25GSSB Self-Supporting 25G Tower Base Plate
The KH8175A Kit includes Template with (4) Base Bolts.(25GSSB Self-Supporting Base Plate not included)

ROHN DM654 Microwave Dish Antenna Mount with 5' foot by 4.50" inch OD Pipe for 65G Tower
Made in the USA!
The ROHN DM654 Microwave Dish (or Other Narrow Beamwidth) Antenna Mount includes (2) Angle Iron Hot Dip Galvanized Steel Crossmembers that Bolt directly to any (1) of the (3) Faces of a 65G Tower Section. Also includes a 5' foot by 4" inch SCH40 (4.5 inch OD) Pipe attached via U-bolts to the center of the Brackets, that in turn, are attached to the (2) leg rails on each side of the Tower Face via additional U-Bolts.

3 Star 500' #10 Solid Copper Ground Wire
25 feet of #10 Solid Copper wire as used for common grounding applications involving Low-Voltage Communications installations like Cable TV, TV Antenna, Satellite TV and Wireless Internet. Priced and sold by in continuous roll (500 ft. per unit ordered)...

3 Star Inc 3S-HMK Backplate Support Kit for Antenna Wall Mount Bracket Assemblies
Made in the USA!
The 3S-HMK Hardware Mounting Kit is comprised of (2) 2.5" x 2.5" x 20" inch Angle Brackets for backplates with (4) 1/2" x 18" inch long Threaded Rods, Nuts and Lock Washers. These Hot Dip Galvanized components form a backplane on one side of the Structural Load Bearing Wall to compliment a Heavy Duty Antenna Wall Mount Assembly directly on the other side of the wall that is also comprised of Angle Bracket Mounts with the Threaded Rods passing through holes in the wall as to "Sandwich" it between them and secure both assemblies together. This method Maximizes Transfer of Weight, Cantilever and Wind Loads to the Structure while Maintaining the Structural Integrity of all components enjoined.
Assess The wall composition for Applicability and Weatherproofing Requirements.
Threaded Rods provided are 18" inches in length. You will need to trim after install.