RCA Male to BNC Female Adapter Connector
NIPPON NF-16 RCA Male to BNC Female Transition Adapter
This is plated with an anti-corrosive finish, Commercial Grade and Quality. The RCA connector is used for composite video on commercial video devices as well as the traditional Audio connections most are used to seeing, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter.The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. It is an alternative to the RCA connector when used for composite video on commercial video devices.
Technicians will use this transition in custom lengths of RG6, RG59 or miniax to inter-connect Audio and Video between pieces of equipment as most RG jumper ends are terminated in "F" connectors or BNC Male connectors and most Video and Audio has RCA Bulkhead connectors protruding from the back of equipment. Most Test Equipment and Commercial Video Equipment has BNC Bulk-heads.
This is plated with an anti-corrosive finish, Commercial Grade and Quality. The RCA connector is used for composite video on commercial video devices as well as the traditional Audio connections most are used to seeing, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter.The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. It is an alternative to the RCA connector when used for composite video on commercial video devices.
Technicians will use this transition in custom lengths of RG6, RG59 or miniax to inter-connect Audio and Video between pieces of equipment as most RG jumper ends are terminated in "F" connectors or BNC Male connectors and most Video and Audio has RCA Bulkhead connectors protruding from the back of equipment. Most Test Equipment and Commercial Video Equipment has BNC Bulk-heads.
An adapter (or adaptor) is a device used to match the physical or electrical characteristics of two different Connectors so that a connection may be made between them and the Equipment You desire to Cross-Connect. Most Connections for Video and RF (Radio Frequency) Equipment is 75 Ohm in Characteristic Impedance. Radio and Microwave Frequency Connections Passing High Power Require 50 Ohms. A Majority of the Adapters offered Here are 75 Ohm. However, with the High Quality Dialectric Found Surrounding the Interior of the Mating Connection, Low Power Usage, and Transition Impedance Matching of Like Characteristic Impedances, Resulting Mis-match of 50 Ohm use woiuld be so Low as to be Considered Negligible.
Live Support
Sorry, we are offline,
click here to send us message
