RCA Male to F Male Adapter Connector
NIPPON NF-51 F Male to RCA Male Transition Adapter
This is plated with an anti-corrosive finish, Commercial Grade and Quality. The RCA connector is used for composite video on commercial video devices as well as the traditional Audio connections most are used to seeing, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter. The F connector is a type of coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable or, in older installations, with RG-59/U cable, but is also used for transport of IF (Intermediate Frequencies) between pieces of equipment.
Technicians will use this transition in custom lengths of RG6, RG59 or miniax to inter-connect Audio and Video between pieces of equipment as most RG jumper ends are terminated in "F" connectors and most Video and Audio has RCA Bulkhead connectors protruding from the back of equipment.
This is plated with an anti-corrosive finish, Commercial Grade and Quality. The RCA connector is used for composite video on commercial video devices as well as the traditional Audio connections most are used to seeing, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter. The F connector is a type of coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable or, in older installations, with RG-59/U cable, but is also used for transport of IF (Intermediate Frequencies) between pieces of equipment.
Technicians will use this transition in custom lengths of RG6, RG59 or miniax to inter-connect Audio and Video between pieces of equipment as most RG jumper ends are terminated in "F" connectors and most Video and Audio has RCA Bulkhead connectors protruding from the back of equipment.
An adapter (or adaptor) is a device used to match the physical or electrical characteristics of two different Connectors so that a connection may be made between them and the Equipment You desire to Cross-Connect. Most Connections for Video and RF (Radio Frequency) Equipment is 75 Ohm in Characteristic Impedance. Radio and Microwave Frequency Connections Passing High Power Require 50 Ohms. A Majority of the Adapters offered Here are 75 Ohm. However, with the High Quality Dialectric Found Surrounding the Interior of the Mating Connection, Low Power Usage, and Transition Impedance Matching of Like Characteristic Impedances, Resulting Mis-match of 50 Ohm use woiuld be so Low as to be Considered Negligible.
Live Support
Sorry, we are offline,
click here to send us message
