Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
ProductQtyPrice
1.25" inch...1$27.30
EZ19B Heavy...1$18.08
5' Foot Antenna...1$16.00
TUF TUG Vertical...1$440.00
5/16" EHS Extra...1$2,695.00
Telescopic...1$23.50
Goods Total6$3,219.88
View Cart Check out
Printer View Tell a Friend

175 FT RG11 Quad Shield Coaxial Cable for Underground Use

Price$100.00
Sale$79.00
You Save$21.00 (21%)
Manufacturer CodeD1100QE-F-OR-175
Color:
Qty
AvailabilityUsually ships in 24 Hrs

Highlights

PE Jacket
Flooded for Underground
(2)100% Foil Coverage
(1)40% Braid
(1)60% Braid
QUAD Shield!

Bulk Quantities Available Here!

Trilogy D1100QE-F-OR-175 175' feet of RG11 Pre-Connectorized Coaxial Burial Drop Cable
Comes Pre-made with Connectors already fitted on the Cable ends for Instant Install out of the Box for Direct Burial Cable TV and some Satellite and Antenna applications. This is really big cable with low RF Signal loss for Cable TV, some Satellite and Antenna applications where the Coaxial Cable RF / IF Signal Feed needs to be Installed Underground for long distances between Equipment and Premise. Low Signal Loss Underground Coaxial that Features a PE (Poly Ethylene) Jacket over Two layers of Bonded Aluminum Foil and (2) layers that total 100% Aluminum Braid, Bonded Foam Dielectric with a Copper Clad Steel Center Conductor. Perfect for HDTV, DTV, DBS, Cable TV, Master Antenna and Satellite Master antenna Applications with 1.0 GHz Bandwidth. Can Also be Utilized as an Underground Signal Feed Transmission line from Towers, Dishes, Antennas and Telephone Poles to Home, Office and Premise.

Note

SuperShield (Quad Shield) - Taking the Tri-Shield construction one step further, this construction adds an additional layer of shielding braid to provide the greatest strength, durability and immunity from network interference. Provides low attenuations for service drop inter-connecting jumper cables.

Specification Sheet
Spec Sheet
cable type
Underground

Telecommunications Tower Paint

The FAA has established recommendations for antenna tower painting and lighting in the Federal Code Advisory Circular 47 CFR Part 17. While these are just recommendations the FCC has been given the authority by Congress to make them requirements. According to these requirements, a tower must be lighted or painted if its height exceeds 200 feet or if it is deemed an aviation hazard in any way. For example, short towers that are near airports must be painted or lighted.

Cut your installation costs with Our No Prime Tower Paint, perfect for use on untreated galvanized surfaces. Tower White and Tower Orange are protective coatings formulated with a vinyl/acrylic emulsion resin providing long-term protection and performance. These Tower Paint coatings offer excellent resistance to weathering, ease of application and freedom from fire hazard. This Tower Paint meets FAA regulations for color coding transmission towers. (Federal Standard No. 595 Colors, 12197 and 17875)

Antenna Tower Lighting and Marking Links