ROHN 65G90R120 120' foot 65G Guyed Tower Complete Kit 90/70 MPH Rated
ROHN 65G Complete 120 Foot 90 MPH (REV. G) Guyed Tower
This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a 120 Foot ROHN 65G Tower with EPA's (Effective Projected Area) Ratings for 90 MPH (REV. G). Refer to Larger Image for EPA Information.
| QUANTITY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | 65G | 10' Tower Section |
| 5 | 6520G | 20' Tower Section |
| 6 | 65JBK | Bolt Kit for 65G Tower Section |
| 1 | APL4HA | Leg Mounted Beacon Plate |
| 1 | 65TGH | Tapered Base Section |
| 2 | GA65GD | Guy Wire Bracket |
| 475 FT | 5/16" Guy Wire (aka ROHN 142265) | |
| 375 FT | 3/16" Guy Wire | |
| 6 | PLP-115 | Yellow Plastic Guard for Guy Wire |
| 6 | BG2146 | 5/16" Big Grip Pre-Formed Deadends |
| 6 | BG2142 | 3/16" Big Grip Pre-Formed Deadends |
| 6 | 7/16THH | 7/16" Thimble |
| 6 | 5/16THH | 5/16" Thimble |
| 3 | 5/8TBE&J | 5/8" x 12" Turnbuckle - Eye-to-Jaw |
| 3 | 1/2TBE&J | 1/2" x 12" Turnbuckle - Eye-to-Jaw |
| 3 | TBSAFETY | Turnbuckle Safety Wire and Clamps Kit |
| 3 | GAC3455TOP | Anchor Rod with 5 Hole Equalizer Plate |
| 1 | AGK1GGX |
Anchor Rod Ground Kit This Kit Includes: (3) 15' of 7/16 EIP IWRC RRL (3) 5/8" x 10' Galvanized Ground Rod (aka 6260) (3) 3/4" Clamp No. 8034 WB (aka 340016) (3) CPC.5/.75 - Anchor Rod Clamp |
| 3 | BGK2GGX |
Tower Base Section Grounding Kit This Kit Includes: (1) 15' of 7/16 EIP IWRC RRL (1) 5/8" x 10' Copper Clad Ground Rod (1) 3/4" Clamp Ground Rod Clamp (1) CPC1.5/.2 - Anchor Rod Clamp |
| 3 | CPC.5/.75 | Anchor Rod Clamp |
| 1 | 15/16x16PP | Pier Pin Insert for 65G Tapered Base |
| 1 | ASSEMBLY GUIDE | |
This 65G Tower is to be used in a Guyed Configuration according to Specifications in the ROHN Catalog. As a Guyed Structure, a 90 MPH rated Tower can rise to a maximum of 500 feet. Refer to ROHN catalog for Foundation and Grounding Detail Information. Consult ROHN Catalog Links at Footer Section at Bottom of Page for more ROHN 65G Tower Details.
CAT5e Keystone Jack Inserts
Category 5E (Enhanced) Operates at up to 350 MHz, instead of the 100 MHz of standard CAT 5. These CAT 5E keystone inserts are fully ANSI/TIA/EIA 568 B.2-1 compliant. CAT 5e jacks are compatible with the current Category 5E Equipment, as well a Legacy and CAT 5. The Enhanced Electrical Performance of CAT 5E ensures capacity in supporting increased Bandwidth Application Requirements. Typical applications would include, Gigabit Ethernet, Distributed Video (CCTV) over CAT 5E, Voice over IP (VoIP). These CAT 5E Keystone Inserts offer Excellent Performance in all aspects of Data Transmission.
A Keystone module is an industry standard type of wall jack used in residential and business environments. The system consists of a modular face plate to which jacks are mounted. Flush mount Keystone Wallplates will fulfill the most complicated station installation requirements through a wide selection of snap-in modules. A variety of jacks and connectors will fill the wall plate openings to meet your specific requirements of voice, data, audio, video, fiber optic, etc. The inserts are a snap to install and remove, giving you a highly adaptable system.
A keystone jack module is a standardized snap-in package for mounting a variety of low-voltage electrical jacks such as TV, Phone, LAN, Data, BNC, RCA or optical connectors into a keystone wall plate, surface-mount box, or a patch panel. Keystone modules have a commonly popular standardized rectangular face of 14.5mm wide by 16.0mm high and are held in place with a flexible tab. This allows them to be snapped into or out of a mounting plate with correspondingly-sized rectangular holes, called ports. All keystones, regardless of the type of jack they carry, are interchangeable and replaceable. This is what makes Keystone a popular choice in today's installations at Home or Office. Some keystones use a pass-though type connector, where there is a jack on both the front face as well as the rear side. Others only have a jack on the front and employ a different means for hard-wiring signal cables in the rear, such as a mini 110, insulation-displacement connector, crimp or solder connection.
