ROHN NPPK Non-Penetrating Satellite Dish Antenna Roof Peak Mount
ROHN
Made in the USA!
This Non-Penetrating Peak Roof Mount is a great solution for broadband antennas and satellite TV dishes. The adjustable mounting plate can be center mounted or to one side as needed to accommodate Your Satellite TV Dish Mount (not included). The 1LG mount with a base and 1-1/4” mounting tube is also an OPTIONAL Dish Mount for the NPPK (not included). It is comprised of (2) standard Non-Pen Ballast Trays hinged to straddle over the Peak of the Roof accommodating up to 16 Standard sized Cinder Blocks. Uses (2) FRMMATs (Not included) for Barrier between the trays and roof surface in Non-Penetrating Applications or can be simply affixed directly to the roof Hardware and Pitch Pads as in standard penetrating applications (Not included).
Height and Antenna Loading capability are dependent upon ballast weight. You need to Consult an Engineer to determine the Load Bearing Capability of the roof that you are entertaining such an Installation. Please refer to the Chart (pdf link above) which is a great place to start in determining whether your circumstances qualify for such an installation.
Download
Pre-Galvanized & Hot Dipped Galvanized Steel Pipe
Pre-Galvanized & Hot Dipped Galvanized Steel Pipe ,offers to meet a variety of communication tower needs such as Cellular, PCS, Wireless Cable, Microwave, Wireless Internet, WiFi Hot Spots, DBS, MDS, MMDS and UHF/VHF reception. Galvanization provides a protective zinc coating that prevents rust and corrosion from water or moisture over time.
Selecting Antenna Mast Pipe
Selecting the proper antenna mast pipe is crucial. Depending on the size of your antenna, it's EPA, weight and height all play a factor in selecting a supportive pole. When planning, it's best to have all the information you can get like outside diameter of your attaching method, the clearance of gutters, siding or other obstacles in the path of your erecting a mast or tower.
When selecting a pipe you will need to know the length, OD (outside diameter), whether the AWG is 16 or 18 (the smaller the number the thicker the steel) and whether you'll need any swaged ended pieces. You'll then need to select the proper mounting such as wall, roof or maybe a tripod mount
Here you will find standard straight pipe in 5' foot and 10' foot lengths. You can also find those same pipes with a special end called a swage. A swaged ended pipe allows you to attach several lengths of pipe together.
ROHN Swaged Masts are Designed for stacking with a Notch and Swage Feature that prevents twisting of one mast section to the other without a set screw.(as shown below)
| Swaged End | Straight End |
 |
 |
