The Rohn 25G Tower Product Line
About The Rohn 25G Tower
ROHN 25G Towers are constructed with high strength steel tubing and feature ROHN's exclusive Zig-Zag© solid rod bracing to provide exceptional strength with double bolted joints which are proven to be the best method of joining tower sections for sturdiness and dependability. All ROHN 25G Towers are hot dip galvanized after fabrication. In this process, each section of the tower is totally immersed in molten zinc, allowing every square inch of the tower, inside and out, to be completely covered. Hot dip galvanizing protects all points of welding and construction against rust and corrosion while providing an attractive finish.
Tower Safety & Constructing
Most Restrictions Allow for 40 feet of Height without the Necessity of Guy Wires, Anchors or Braces. However, No Tower is self supporting during construction! Always use temporary guys on the top most section, and install permanent guy wires as soon as a guy point height is reached.
Tower Resources
Below, you will find documents, drawings and images related to the Rohn Products 25G Communications Tower. Resource and reference information on the best practices, materials, parts, accessories and recommended assembly of the tower. To make this page useful we have also provided direct links to any of the referenced products. As an Authorized Rohn Distributor we have the experience and knowledge to get your project done. Remember support for the Rohn 25G tower is only a click away.
| Rohn 25G Self Supporting Towers | ROHN 25G Bracketed Towers | ROHN 25G Guyed Towers |
|---|---|---|
