ROHN 25AG3 Top Cap Section with 2.25" OD Mast Tube for 25G Tower

ROHN 25G 10' foot Standard Main Tower Section for 25G Tower
Made in the USA!
This ROHN 25G 10' foot Tower Section is the main component of every 25G Series Guyed, Self-Supporting and Bracketed Tower Kit configuration. This section based on a 12-1/2 inch equilateral triangular design, constructed of extra heavy duty 1-1/4 inch steel 16 gauge wall side rails with seven bays of continuous solid steel rod bracing and swaged, double-bolted connection joints which are proven to be the best method of joining tower sections for sturdiness and dependability.
Each 10 foot Tower Section is Hot Dip Galvanized and shipped containing all required nuts and bolts inside one leg and weighs about 37 lbs. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications delineated in every ROHN Tower Catalog Kit.
This Item Ships LTL Freight ONLY!

ROHN 25G3 3' foot Short Main 25G Tower Section can Ship UPS Package
Made in the USA!
This ROHN 25G3 is a 3 foot 25G Short Main Tower Section that can be used in ALL 25G Tower Series configurations. It is based upon the same 12-1/2 inch equilateral triangular design, constructed of extra heavy duty 1-1/4 inch steel 16 gauge wall side rails with continuous solid steel rod bracing and swaged, double-bolted connection joints just like the 25G 10' foot Main Tower Section but comes in at less than 40 inches in length.
Each 3 foot Tower Section Hot Dip Galvanized and is shipped containing all required nuts and bolts inside one leg and weighs about 14 lbs. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications delineated in every ROHN Tower Catalog Kit.
This Item can Ship UPS Package!

ROHN 25G5 5' foot Short Main 25G Tower Section can Ship UPS Package
Made in the USA!
This ROHN 25G5 is a 5 foot 25G Short Main Tower Section that can be used in ALL 25G Tower Series configurations. It is based upon the same 12-1/2 inch equilateral triangular design, constructed of extra heavy duty 1-1/4 inch steel 16 gauge wall side rails with continuous solid steel rod bracing and swaged, double-bolted connection joints just like the 25G 10' foot Main Tower Section but comes in at less than 96 inches in length.
Each 5 foot Tower Section is Hot Dip Galvanized and shipped containing all required nuts and bolts inside one leg and weighs about 19 lbs. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications delineated in every ROHN Tower Catalog Kit.
This Item can Ship UPS Package!

ROHN 25AG Top Cap Section with 2.00" OD Mast Tube for 25G Tower
Made in the USA!
The ROHN 25AG Top Cap Pinnacle Section is 9'-0" in height, consists of 16 gauge walls with 5 bays of bracing, swaged double-bolted connections and a 2.00" OD Mast Tube protruding 8.25 inches above apex of side rails at the Pinnacle of this Section. A 2.00 inch Outside Diameter Mast Tube at the Pinnacle of the ROHN Top Cap Section means approx. 1-13/16 inch Inside Diameter. Each 25G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!

ROHN 25AG4 Top Cap Section with Thrust Bearing Plate for 25G Tower
Made in the USA!
The ROHN 25AG4 Flat Top Cap Section is 8'-3/16" in height, featuring a Top Plate pre-drilled for the ROHN TB-3 Thrust Bearing, 16 gauge walls with 5 bays of bracing and swaged double-bolted connections. Each 25G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!

ROHN 25AG1 Top Cap Section with 1.25" NPT Mast Tube for 25G Tower
Made in the USA!
The ROHN 25AG1 Top Cap Pinnacle Section is 9'-3" in height, consists of 16 gauge walls with 5 bays of bracing, swaged double-bolted connections and a 1.25" NPT, 14 gauge Mast Tube protruding 12 inches above apex of side rails at the Pinnacle of this Section. A 1.25" NPT translates to a 1.66" OD threaded Mast Tube at the Pinnacle of the ROHN Top Cap Section that can then be used for DBS Satellite Dish Antenna mounting as well as adaptations using various other 1-1/4" NPT threaded Pipes, Flanges, Bases, etc. for Extensions, Mounting, Lighting, Cameras and Housed Transceivers. Each 25G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!

ROHN 25AG2 Top Cap Section with 2.25" OD Mast Tube for 25G Tower
Made in the USA!
The ROHN 25AG2 Top Cap Pinnacle Section is 9'-9" in height, consists of 16 gauge walls with 5 bays of bracing, swaged double-bolted connections and a 2.25" OD Mast Tube protruding 18 inches (of 36" total tube length) above apex of side rails at the Pinnacle of this Section. A 2.25 inch Outside Diameter 14 gauge Mast Tube at the Pinnacle of the ROHN Top Cap Section means approx. 2 and 1/16-3/32 inch Inside Diameter. For those interested in seating a 2.00" OD mast tube within, be prepared to flatten any HDG burring by bore honing. Each 25G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!

ROHN 25AG5 Top Cap Section with 2.75" OD Mast Tube for 25G Tower
Made in the USA!
The ROHN 25AG5 Top Cap Pinnacle Section is 8'-3.5" in height, consists of 16 gauge walls with 5 bays of bracing, swaged double-bolted connections and a 2.75" OD Mast Tube protruding 0.00" inches above apex of side rails at the Pinnacle of this Section. The Mast Tube comes with (2) set screw lugs in place with the screws shipped inside one leg. A 2.75 inch Outside Diameter Mast Tube at the Pinnacle of the ROHN Top Cap Section means approx. 2.584" inch Inside Diameter. For those interested in seating a 2.50" inch OD mast tube within, be prepared to flatten any HDG burring by bore honing. Each 25G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!