ROHN 45BRKT050 50 Foot 45G Bracketed Tower Complete Pre-engineered Kit
ROHN
Made in the USA!
The ROHN 45BRKT050 50' foot 45G Wall Bracketed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna load and Wind Speed indicated. This 45BRKT050 Kit is comprised of (4) 10' Tower Section(s), (1) Top Cap Section, (1) 5' Base Section, (2) Brackets and Grounding Package(optional), less Foundation and Installation.
This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Wall Bracketed 50 Foot ROHN 45G Tower with EPA (Effective Projected Area) Ratings for 70, 80 or 90 MPH (No Ice). For more info click on the "More Info" Tab above
This Item Ships LTL Freight ONLY!
| INCLUDED MATERIALS WITH 45BRKT050 KIT | ||
|---|---|---|
| QUANTITY | PART NUMBER | DESCRIPTION |
| 1 | 45AG2 | Top Cap Tower Section |
| 4 | 45G | 10' Tower Section |
| 1 | 45AJBK | Bolt Kit for 45G Top Section |
| 4 | 45JBK | Bolt Kit for 45G Tower Section |
| 2 | HBUTVRO | Heavy Duty Adjustable (18 - 36") House Bracket |
| 1 | SB45G | 5' Base Section |
| 1 | ACWS | Anti-Climb Warning Sign |
| 1 | ASSEMBLY GUIDE | Printed Specification/Assembly Guide |
| OPTIONAL ACCESSORIES FOR 45BRKT050 KIT | ||
| QUANTITY | PART NUMBER | DESCRIPTION |
| 2 | BGK3G | Tower Base Grounding Kit /includes: (1) 10' of #4 Copper Wire (1) 5/8" x 8' Copper Clad Ground Rod (1) 5/8" Ground Rod Clamp (1) 5/16" x 2 3/8" Grade 5 HDG Bolt (1) 5/16" Hex HDG Nut (1) Hy-Lug YA4C-L4 Compression Terminal Lug |
The 45AG2* Top Cap Tower Section is the Default Standard
Top Section for the 45G Series Tower Kits.
We Offer the following Substitutions when Ordering Our Kits:
| OPTIONAL TOP CAPS FOR 45BRKT050 KIT | |||
|---|---|---|---|
| PART NUMBER | DESCRIPTION | HEIGHT | O.D. |
| 45AG | Top Cap | 9' | 2" |
| 45AG1 | Top Cap | 9' | 1.66" |
| 45AG2* | Top Cap | 9' | 2.25" |
| 45AG3 | Top Cap | 9' | 2.25" |
| 45AG4 | Flat Plate Top Cap for Thrust Bearing |
7' - 8" | Pre-drilled FLAT |
| 45AG5 | Top Cap | 9' | 2.75" |
This 45G Tower is to be used in a Wall Bracketed Configuration according to Use and Foundation Specifications in the ROHN Catalog. This Height Configuration relies on a SB45G embedded in a Concrete Foundation Specified by Engineering. As a Wall Bracketed-Properly Mounted Structure a 70, 80 or 90 MPH rated 45G Tower can rise to a maximum of 100 feet. Consult ROHN 45G Catalog Links of the Footer Section at Bottom of Page for more ROHN 45G Tower Configuration, Foundation and Grounding Detail Information.
Download PDFROHN 45GSR Tower Sections, Bases and Top Plates
Since there are various other Manufacturers of Towers and Tower accessories that copy the ROHN Tower design, if you are not sure of the manufacturer of your Tower, you can at least compare the actual measurements and design of yours to those found in the spec. sheets in the ROHN catalog section via the Link provided above to assure yourself that additional sections or parts will fit. We cannot make that determination for you as the ROHN clones are something we don't carry or otherwise represent in our Product line. All towers in the GT Series are constructed with high strength steel tubing and feature ROHN's exclusive Zig-Zag ® solid rod bracing to provide exceptional strength. All GT Series Towers are hot dip galvanized after fabrication. In this process, each section of the tower is totally immersed in molten zinc, allowing every square inch of the tower, inside and out, to be completely covered. Hot dip galvanizing protects all points of welding and construction against rust and corrosion while providing an attractive finish.
The 45GSR is a true multi-use structure that provides excellent strength for applications up to 340´. It´s offered with solid steel rod legs to satisfy a wide variety of needs under varied conditions. When properly installed, the standard tower will support the loads shown on various guyed and self-supporting information sheets in the ROHN catalog.
Most Restrictions Allow for 45 feet of Height without the Necessity of Guy Wires, Anchors or Braces. However, No Tower is self supporting during construction! Always use temporary guys on the top most section, and install permanent guy wires as soon as a guy point height is reached.
Wind Loading, Antenna Loading and Wind Survivability ratings vs. Height Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. Contact Us with any Questions you may have regarding Use prior to Purchase. All Information regarding the ROHN 45GSR Tower line, Parts and Accessories is as accurate and complete as we can possibly provide given that this Resource Offering is subject to change without Notice and is beyond Our Control.
This Buyers Guide will answer many questions you may have on this Product Line.
