Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

ROHN DM45G2 Microwave Dish Antenna Mount with 5' foot by 2.38" OD Pipe for 45G 45GSR Tower

Price$289.00
Manufacturer CodeDM45G2
Qty
AvailabilityUsually ships in 24 Hrs

Highlights

Hot Dip Galvanized
2 Plate accessory
Fits 45G/45GSR Sections
Accommodates:
2 inch SCH40 (2-3/8" OD) Pipe
(Included)

Bulk Quantities Available Here!

ROHN DM45G2 Microwave Dish Antenna Mount with 5' foot by 2.38" OD Pipe for 45G Tower Face
Made in the USA!Made in the USA!
The ROHN DM45G2 Microwave Dish (or Other Narrow Beamwidth) Antenna Mount includes (2) Angle Iron Hot Dip Galvanized Steel Crossmembers that Bolt directly to any (1) of the (3) Faces of a 45G Tower Section. Also includes a 5 Foot by 2 inch SCH40 (2-3/8 inch OD) Pipe attached via U-bolts to the center of the Brackets, that in turn, are attached to the (2) leg rails on each side of the Tower Face via additional U-Bolts. A ROHN TA45 Tower Torque Arm Stabilizer Assembly is recommended in the immediate vicinity of this Mount.

The ROHN DM45G2 mount goes together quickly, with a minimum of bolted connections. The angle steel cross members connect directly to the tower legs with easy-to-use U-bolts. This mount is hot dip galvanized.

This Kit Includes
DM45G2
QUANTITY PART NUMBER DESCRIPTION DRAWING NUMBER
2 KY1550 Dish Mount Bracket B881437
1 KH275 2" STD x 5' Mounting Pipe B770160
2 KY1549 Mounting Clip Angle B881436
4 210018GA 1/2 x 1 1/2" Bolt Assembly C770404
8 JR65A 3/8" U-Bolt Assembly B651028
4 JR61A 3/8" U-Bolt Assembly B651028
Specification Sheet
Spec. Sheet

ROHN Tower Antenna Mount and Assemblies

ROHN Tower Antennas Mounts for All Series. Select by the ROHN Tower Series and choose between Tower Top Antenna Mounts, Tower Apex Antenna Mounts, Tower Side Arm Antenna Mounts with or without Tiebacks and Tower Face Antenna Mounts. These Mounts will differ based on the Type of Antenna, the Size of the Mast Pipe, Pole or Tube it is designed to be Mounted on and the Tower Leg Size it will be Mounted to. These Mounts were Primarily Engineered for ROHN G Series to include 25G 45G 55G 65G, RTL Towers, RSL Towers and SSV Towers. As there are Other Manufacturers with Similar Engineering in Their Communications Tower Series, you would find that some of the Antenna Tower Mounts will fit other Branded Towers as well.