ROHN 55G110R300 300' foot 55G Guyed Tower Complete Kit 110/90 MPH Rated
ROHN
Made in the USA!
The ROHN 55G110R300 300' foot 55G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 55G110R300 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 300 Foot ROHN 55G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
This ROHN 55G Tower is to be used in a Guyed Configuration for Wireless Internet, Amateur and Business Radio, SCADA, DBS and Satellite Services, Cellular and Repeater, Smaller Microwave, Narrow Beamwidth Antenna or Broadcast Installations according to Specifications in the ROHN Catalog.
As a Guyed Structure, a 110 MPH Rated ROHN 55G Tower can rise to a Maximum of 300 Feet.
Click on the More Info and Specification Tabs above for all the Information You Need on this Product including EPA (Effective Projected Area wind load permissible of Antenna Surface Area in Square Feet), Foundation, Guying, Assembly and Grounding Detail Information.
This Item Ships LTL Freight ONLY!
EPA for Exposure B / Revision G = 19.0 (Sq. Ft.)
EPA for Exposure C / Revision G = 16.1 (Sq. Ft.)
EPA at ( 90 MPH) per Revision F = 11.2 (Sq. Ft.)
| BILL OF MATERIALS: 55G110R300 110/90 MPH RATED PRE-ENGINEERED KIT | ||
|---|---|---|
| QUANTITY | PART NUMBER | DESCRIPTION |
| 1 | APL55G | Top Beacon Plate for 55G |
| 30 | 55G | 10' Main Tower Section |
| 30 | 25JBK | Bolt Kit for 55G Tower Section |
| 1 | BPC55G | Standard Concrete Base Plate |
| 8 | GA55GD | Guy Wire Bracket Assembly |
| 2,350 ft | 5/16EHS | 5/16” Extra High Strength Strand |
| 2,500 ft | 1/4EHS | 1/4” Extra High Strength Strand |
| 1,675 ft | 3/16EHS | 3/16” Extra High Strength Strand |
| 24 | PLP-115 | Yellow Plastic Guard for Down Guys |
| 12 | BG2146 | 5/16" Big Grip Preform Dead-ends |
| 18 | BG2144 | 1/4" Big Grip Preform Dead-ends |
| 18 | BG2142 | 3/16" Big Grip Preform Dead-ends |
| 12 | 7/16THH | 7/16" Heavy Duty Thimble |
| 18 | 3/8THH | 3/8" Heavy Duty Thimble |
| 18 | 5/16THH | 5/16" Heavy Duty Thimble |
| 15 | 5/8TBE&J | 5/8" x 12" Turnbuckle Eye-to-Jaw |
| 9 | 1/2TBE&J | 1/2" x 12" Turnbuckle Eye-to-Jaw |
| 6 | TBSAFETY | Turnbuckle Safety Wire and Clamps Kit includes: (1) 14001 – 1/4” Galvanized Guy Clamp (1) 1/44GW15 – 1/4” x 15’ Guy Wire |
| 3 | GAC5655TOP | 120" Guy Anchor with 5 Hole Equalizer Plate |
| 3 | GAC3455TOP | 81" Guy Anchor with 5 Hole Equalizer Plate |
| 2 | AGK1GGX | Anchor Rod Ground Kit includes: (3) 15' of 7/16 EIP IWRC RRL (3) 5/8" x 10' Galvanized Ground Rod (AKA 6260) (3) 3/4” Clamp No. 8034 WB (AKA 340016) (3) CPC.5/.75 Anchor Rod Clamp |
| 3 | BGK2GGX | Tower Base Section Grounding Kit includes: (1) 15' of 7/16 EIP IWRC RRL (1) 5/8" x 10' Copper Clad Ground Rod (1) 3/4" Clamp Ground Rod Clamp (1) CPC1.5/2 Tower Section Rail Clamp |
| 3 | CPC1/1.25 | Anchor Rod Clamp |
| 3 | CPC.5/.75 | Anchor Rod Clamp |
| 1 | 3/4x12PP | Concrete Base Plate Pier Pin Insert |
| 1 | ASSEMBLY GUIDE | Printed Specification/Assembly Guide |
Guyed Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the Downward force of all Downguy tensioned as specified, terminated to a properly embedded Anchor, the weight/size of the Foundation and the cohesive of the soil to prevent skid/pullout and all together to counter a Structural Failure or Tower tip-over moment, as well as the strength of the tower members to withstand these Forces against them. ROHN Tower Kits are designed based on assumptions made regarding Windspeed, EPA (Antenna Load), Ice Load, Transmission Cable Loads, Height, Standard Soil Conditions, Surrounding Environment and Duty (Exposure Categories).
The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project.
It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, and/or Fill Out the Tower Quote Data Sheet Form found by clicking the Specification Tab above and send to 3 Star Inc./ROHN for a review.
*Per Rev G requirements, any structure greater than 10' foot requires a climber safety device.
Download PDFTelescoping Antenna Mast Down Guy Kits
Remember those older AM/FM Portable Radios with the antenna that you extended by pulling it out? Or the Radio Antennas on older cars that would pop- out, extend and retract when you turned on the radio? This Mast isn't an Antenna, but it extends and retracts by hand in similar fashion. Available in 20', 30', 40' and 50' heights. All ROHN telescoping masts are pre-galvanized and come assembled with hardware. Erection is made by simply connecting guys and brackets to the attached unique heavy duty rolled edge guy rings and clamps, extend each section one at a time (starting with the innermost section), insert the locking cotter pins, rotating the tubes to a locked position, and tightening the clamps. Repeat the process on each successive section until fully erect.
The unique ROHN Products design features interior tube flanging combined with a double crimped exterior tube to produce a stronger and more stable joint than most common masts. This design exclusive also prevents the sections from accidentally pulling apart and allows disassembly by pulling each section out through the lower end.
Each section extends deeper in to the lower tubes than most other designs, adding still further to the stability of the structure.
H Series
This heavy duty series uses 1-1/4" 16 gauge galvanized tubing for top section. All other sections are 18 gauge.
Assembly
1. Secure base and anchors (sold separately).
2. Attach lowered mast to base.
3. Secure guy lines to the lower Guy Ring and attach to anchors. Align the mast vertically by tightening the Guy Lines.
4. Secure upper Guy Ring using the appropriate Mast Clamp to desired location on the upper Tube (see note 8 on page 10).
5. Secure appropriate length guy lines to the upper Guy Ring and let them hang.
6. Raise the upper Tube and inset the cotter pin. Make sure that the cotter pin is inside the notch in the inside tube.
7. Secure the cotter pin and tighten the mast clamp.
8. Secure appropriate length guy lines to the next highest Guy Ring, and let them hang.
9. Raise the next smallest Tube and insert the cotter pin. Make sure that the cotter pin is inside the notch in the inside tube.
10. Secure the cotter pin and tighten the mast clamp.
11. Repeat steps 8-10 until all sections have been raised and are secured.
12. Attach all hanging Guy Lines to their respective anchor. Align the mast vertically by tightening the Guy Lines. Make sure to work your way up the mast while tightening.
This Buyers Guide has will answer many questions you may have on this Product Line. For more detailed information and Specification Sheets covering many aspects of Various Parts, Accessories and Installation Scenarios. Please refer to the "Telescopic Mast" Link appearing in the Footer of this Page Below!
Telescoping Masts are not recommended for commercial, CB or beam antenna installations.
