Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

ROHN 6520DB 20 Foot Double-Braced Section for 65G Tower

Price$3,582.00
Manufacturer Code6520DB
Qty
AvailabilityCall to Order or Request Quote
Oversized Item - Request Freight Quote
Call (804) 550-7202
Email info@3starinc.com

Highlights

Hot Dip Galvanized
Double Braced 5/8"
Zig-Zag Rod Bracing
1.90" OD Steel Tubing
Side Rails
24-1/4" Equalateral
Triangular Design
Can be used in:
Guyed, Self Supporting

Bulk Quantities Available Here!

ROHN 6520DB 20 Foot Double-Braced Section for 65G Tower
Made in the USA!Made in the USA!
The 6520DB is a 20 foot Double Braced Tower Section. The 65G Tower Series uses bolted flange joints. Featuring an 24-1/4 inch equilateral triangular design, is constructed of extra heavy duty 1.90" O.D. steel tubing side rails with continuous 5/8" solid steel rod bracing. Each 6520DB 20 foot section has (2) or double the rod bracing runs on each face of the 20 foot section and is shipped with all required nuts and bolts. The 65G tower can be used guyed, self-supporting configurations according to specifications in the ROHN catalog. As a guyed structure, it can rise to a maximum of 500 feet. The 65G tower can be used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog.
This Item Ships Special Flatbed Freight ONLY
Call for a Shipping Quote

Buyers Guide
Specification Sheet

ROHN 65G Series Tower Sections

Since there are various other Manufacturers of Towers and Tower accessories that copy the ROHN Tower design, if you are not sure of the manufacturer of your Tower, you can at least compare the actual measurements and design of yours to those found in the spec. sheets in the ROHN catalog section via the Link provided above to assure yourself that additional sections or parts will fit. We cannot make that determination for you as the ROHN clones are something we don't carry or otherwise represent in our Product line.
All Tower sections in the 65G Series use bolted flange joints in connection with other sections. Featuring a 24-1/4 inch equilateral triangular design, the 65G is constructed of extra heavy duty 1.90" O.D. steel tubing side rails measuring 24 inches Center to Center with continuous 5/8" solid steel rod bracing and are constructed with high strength steel tubing and feature ROHN's exclusive Zig-Zag ® solid rod bracing to provide exceptional strength. All 65G Series Towers are hot dip galvanized after fabrication. In this process, each section of the tower is totally immersed in molten zinc, allowing every square inch of the tower, inside and out, to be completely covered. Hot dip galvanizing protects all points of welding and construction against rust and corrosion while providing an attractive finish.

The 65G is a true multi-use structure that provides excellent strength for applications up to 500´ with heavy steel tube legs to satisfy a wide variety of needs under varied conditions. When properly installed, the standard tower will support the loads shown on various guyed and self-supporting information sheets in the ROHN catalog.

Most Restrictions Allow for 40 feet of Height without the Necessity of Guy Wires, Anchors or Braces. However, No Tower is self supporting during construction! Always use temporary guys on the top most section, and install permanent guy wires as soon as a guy point height is reached.


ROHN 65G Buyers Guide

ROHN 65G Buyers Guide

This Buyers Guide will answer many questions you may have on this Product Line.

Products   Recently Viewed