Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

ROHN 65G 50 Foot Camera Tower R-65SS050CT

Price$6,565.00
Manufacturer Code65SS050CT
Grounding:
Qty
AvailabilityIn stock call 804-550-7202 or request Freight Quote
ShippingCan ship anywhere
Oversized Item - Request Freight Quote
Request Quote
Call (804) 550-7202
Email info@3starinc.com

Highlights

Hot Dip Galvanized
Bolted Flange Joints
Zig-Zag Rod Bracing
1.9" Steel Tubing
Side Rails
24-1/4" Equilateral
Triangular Design
Can be used in:
Self Support Config

Bulk Quantities Available Here!

ROHN 65SS050CT Complete 50 Foot Camera Tower

 

Rohn 65SS030CT - 50' Freestanding G-Series Camera towers offers an easy low cost solution  . Hot Dipped Galvanized for corrosion protection . All sections are tubulor and feature 1.9" OD pipe legs and cross bracing is formed by a continuous 3/8" solid rod bracing into a zig-zag pattern for strength . BGK2G Grounding is optional . Includes short base section, tower sections,  and 3/16” top mounting plate with attachment hardware .All towers have "FIXED " bases . 

 

This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Self Supporting 50 Foot ROHN 65G Camera Tower with EPA's (Effective Projected Area) Ratings for 70, 80 or 90 MPH (No Ice). Refer to Specification for Larger Image, Brochure ,Install guide and all 65G Kits Ice Loading and EPA Information.

 

 

THIS KIT INCLUDES
QUANTITY PART NUMBER DESCRIPTION
3 65G +6520G 1x10' + 2x20'  65G Main Sections
3 65JBK Bolt Kit for 65G Tower Section
1 KC970  3/16" Top Mounting Plate 
1 SB65GH Base Section
2 BGK2G (OPTIONAL) Ground Kit
1 ACWS Anti-Climb Warning Sign
1 ASSEMBLY GUIDE

 

This 65G Camera Tower is to be used in a Self-Supporting Configuration according to Use and Foundation Specifications in the ROHN Catalog. This Height Configuration relies on a R-SB65GH Embedded in a Concrete Foundation Specified by Engineering. As a Free-Standing, Self-Supporting Structure, a 70 MPH rated 65G Tower can rise to a maximum of 50 feet. Please Consult 3 Star Inc  for more ROHN 65G Tower Configuration, Foundation and Grounding Detail Information.

 

Site-specific designs are available upon request

 

 

 

Buyers Guide
Buyers Info
Spec sheet
Rate this product.
Product isn't rated yet. Write a review.

ROHN Camera Towers

ROHN structures can be designed to be utilized for security towers and surveillance applications. Our security towers are supporting cameras at military and government installations around the world. We have both solid and tubular security tower designs and all welded or knock-down designs to meet your security needs.

The all welded 65G tower sections can support 14.5 square feet of camera in 90mph, ½" ice conditions. ROHN has standard 65G security camera towers from 10´ up to 50´. ROHN also designs site-specific towers for security applications in all wind and ice conditions. Our rigid designs limit tower top movement to help ensure camera functionality even through severe weather conditions.


STANDARD VG SELF-SUPPORTING CAMERA TOWERS (all-welded)

REV. G:

110 MPH 3-SEC GUST WIND SPEED (NO ICE),

40 MPH 3-SEC GUST WIND SPEED (3/4" ICE),

CLASS II , EXPOSURE C , TOPO CATEGORY 1

SEISMIC COEFFICIENT  S <1.0

 

ROHN 65G Camera Tower

STANDARD VG SELF-SUPPORTING CAMERA TOWERS (field bolted)

REV. G:

110 MPH 3-SEC GUST WIND SPEED (NO ICE),

40 MPH 3-SEC GUST WIND SPEED (3/4" ICE),

CLASS II , EXPOSURE C , TOPO CATEGORY 1

SEISMIC COEFFICIENT  S <1.0

 

ROHN Self Supporting Tower Rev.G

DESIGN NOTES:

1. Tower designs are in accordance with ANSI/TIA/222-G.

2. Camera and mount assumed symmetrically placed at tower top.

3. Tower design assumes one 7/8" line on each tower face.

4. Assembly drawings and standard foundation details are provided with the tower.

5. Standard foundation illustrated is for general information only and is based on Rev G presumptive clay soil parameters.

 

FEATURES:
o
Completely hot-dip galvanized after fabrication to provide absolute corrosion protection.
o Pre-engineered loading charts meet varying individual specs and site conditions.
o Typical uses include small dishes, broadband, security and two-way communication.


ROHN G-Series Self Supporting Towers



ROHN G-Series Self Supporting Towers


Get Adobe Reader



This ROHN G-Series Self Supporting Towers Guide will answer many questions you may have on this Product Line.


GUIDELINES FOR THE PREPARATION OF A GEOTECHNICAL REPORT

I. PURPOSE AND INTENT

a) The intended purpose of these guidelines is to assist the customer and/or owner to retain the services of a Geotechnical Engineer.

b) It is not ROHN´s purpose or intent to supercede the Geotechnical Engineer´s knowledge, judgement and/or experience. It is the Geotechnical Engineer´s responsibility to add or delete from these items, based on local site conditions and other factors.

c) Additional information is provided in ANSI/TIA-222-G Annex G "Geotechnical Investigations".

II. DISCLAIMER

a) ROHN will not accept any liability, either expressed or implied, for the use of, and omissions in, these guidelines.

III. EXPLORATORY BORINGS

a) Borings should be taken at tower legs for self-supporting towers and at the base and anchor points for guyed towers. For small self-supporting towers, two borings may suffice. For large self-supporting towers, one boring should be taken at each tower leg. A "small" self-supporting tower is assumed to have a face width less than 20 feet and a compression load less than 50 kips per leg. For pole structures, one boring may suffice.

b) The minimum boring depth should be 30 feet for pole structures, self-supporting towers and guyed tower bases. For guyed tower anchors, the minimum depth should be 15 feet. The actual depth of boring must be determined by the Geotechnical Engineer based on reactions, soil conditions and the type of foundation recommended.

c) If borings cannot be advanced to the desired depth, rock corings should be taken. Rock Quality Designation (RQD) values and compressive strengths should be determined.

IV. GEOTECHNICAL REPORT

a) The following properties, for each soil layer encountered, should be determined by field or laboratory testing and summarized in the geotechnical report:

1. Soil classification and elevations
2. Standard penetration values
3. Unconfined compression strength
4. Angle of internal friction
5. Cohesion
6. "In-Situ" soil density and moisture content
7. Rock quality designation (RQD) and percent rock sample recovered
8. Other properties unique to site conditions

b) The following items should be discussed in the geotechnical report:

1. Geological description of site
2. Observed and expected ground water conditions
3. Expected frost penetration depth
4. Corrosion potential of soil and corrosion protection recommendations
5. Site access and potential construction difficulties
6. Dewatering or site drainage requirements
7. Backfill material recommendations
8. Settlement considerations
9. Additional information to aid foundation designer
10. Recommended types of foundations
11. Design parameters for uplift, download and lateral load
12. Factor of safety considered when allowable vs. ultimate design parameters are provided
13. Recommended construction techniques and inspections

Products   Recently Viewed