Grounding Block with Single F-81 Barrel Port for RG Coaxial Cable TV Antenna SI-GB-50L
Senior Industries
The SI-GB-50L 2.2 GHz passband Single Port Coaxial Cable Ground Block that features a Single, 1 Sealed Gasket Long F Connector Barrel Port in a Stainless Steel Ground Block that accommodates up to a #10 AWG Ground Wire (Available Separately) with ease primarily for Outdoor use, but can be used in Crawlspaces or at Roof level where necessary as long as the Ground wire is as short as possible to the Ground connection of either the Electrical Power Ground Rod, Electrical Meter Base Box, Common Communications Bonding location or your own Ground Rod. (Available Separately)
- Provides ground path between drop cable and ground wire
- Stainless Steel Construction
- New ground clip mechanism provides for fast and easy termination of up to
a #10 ground wire - Includes one 2.2 GHz F81 connector installed
- Integrated seal gasket
- Meets SCTE Specifications
- UL and CUL listed
This is what you want to use to Ground your Cable TV or HDTV Antenna Coaxial Cable Outside before bringing the Signal Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your TV and Entertainment Electronics. The grounding Block will convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.
View/DownloadMasting Accessories
Masting Accessories that include Down Guy Rings, Anchors, Wire, Screws, Clamps, Pitch Pads or Rubber Mats, Wire Thimbles, etc! Though most Mounts come with the minimal amount of Requisite Hardware, it by no means accounts for all Mounting Options, Materials and Custom Installation Scenarios.
Take a moment to Consider the Options and Materials in Use. Then Select the Appropriate Hardware to realize your Goal. The Flexibility and Longevity of any Mount to Match the Mounting Conditions may depend on it.
Tape and Sealant Products
Self-Amalgamating tape is designed to be a stand-alone weatherproofing solution. COLD SHRINK TAPE has the ability to "weld" itself chemically and mechanically into a mass with no layers, to form a watertight skin. COLD SHRINK TAPE was developed in collaboration with international electrical engineers. Exceptional quality control pro- cedures are strictly applied throughout the manufacturing process ensuring a tape that delivers high performance, reliabilty and flexibility for a wide variety of applications.
When applied under tension, COLD SHRINK TAPE provides a neat, void free, continuous wrapping, without the need for external heat or pressure. It can be easily applied by hand, contouring closely to irregular shapes or bends to form a permanent insulating layer or waterproofing barrier. In addition, when cut, COLD SHRINK TAPE can be removed cleanly, facilitating easy access and inspection of the protected area. Service life for COLD SHRINK TAPE is projected to be several years when exposed to out-of-door conditions, and equal to cable life in enclosed locations.
FEATURES AND BENEFITS: Forms tough, homogeneous, watertight skin. Provides for temporary and/or long term protection even during prolonged immersion in water. Resists abrasion, impact, sunlight, and most chemicals. Eliminates need for overwrap in most applications. Keeps installation costs down. Requires no heat or open flame. Minimizes equipment, promotes safety and convenience. Cuts installation costs. Wraps a wide range of sizes, shapes, and materials. Reduces need for special tapes or devices. Lowers inventory. Has excellent electrical properties, water, resistance, ozone resistance and corrosion resistance at temperatures ranging from -40 degrees C to 100 degrees C continuous , and to 130 degrees C for short periods of time. Does not transfer adhesive. Does away with messy clean-up after use. Has little tack. Eases handling. Speeds application to save time.
