Senior Industries Single Port Coaxial Cable TV Antenna Ground Block SI-GB-50L
Senior Industries
The SI-GB-50L Single Port Coaxial Cable Ground Block that features a Single, 1 Sealed Gasket Long F Connector Barrel Port in a Stainless Steel Ground Block that accommodates up to a #10 AWG Ground Wire (Available Separately) with ease primarily for Outdoor use, but can be used in Crawlspaces or at Roof level where necessary as long as the Ground wire is as short as possible to the Ground connection of either the Electrical Power Ground Rod, Electrical Meter Base Box, Common Communications Bonding location or your own Ground Rod. (Available Separately)
- Provides ground path between drop cable and ground wire
- Stainless Steel Construction
- New ground clip mechanism provides for fast and easy termination of up to
a #10 ground wire - Includes one 2.2 GHz F81 connector installed
- Integrated seal gasket
- Meets SCTE Specifications
- UL and CUL listed
This is what you want to use to Ground your Cable TV or HDTV Antenna Coaxial Cable Outside before bringing the Signal Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your TV and Entertainment Electronics. The grounding Block will convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.
Ground your Coaxial Cable System
Commensurate with Coaxial Cable TV Antenna and Satellite TV Splitter Installation, you want to Ground your Cable TV or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your Satellite Receiver and TV Set(s). The Integral Grounding Block designed onto most Outdoor Use Compatible Satellite Signal Splitter we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Satellite TV, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.
Grounding & Bonding Are Important
Ground Blocks and Proper Grounding are an Important, often overlooked, aspect of Your Over-all Cable TV, HDTV or Satellite Antenna Installation and Safety. Proper Grounding can also Reduce the Reception of Interfering RF Signals. Grounding of Masts, Antennas, Cable TV and other RF Distribution Systems are covered by the NEC. Grounding can be as simple as a 12 AWG Ground Wire connected a short distance away to a 8 foot 5/8" DIA Copper Ground Rod (not supplied) or Bonded to the Existing Power Ground by the Power Meter installed on the side of your Home or Office. You may notice that most new Cable TV, Satellite and TV Antenna Installations are effected in this Manner. However, most State and some Local codes will contain requirements that supersede that of the NEC. Please Refer to Your Local Building and Electrical Codes.
Sorry, we are offline,
click here to send us message
