Blackburn ADR25 1 Conductor Aluminum Mechanical Lug Connector 6 AWG–250 kcmil
Blackburn
The ADR25 is a Tin-plated Aluminum Block Lug, Non-Insulated Mechanical Connector measuring 2"L x 1"W x 1.125"H. The Barrel Opening is 5/8" ID, entry from Front and Back with a Hex Set Screw that accommodates from 6 AWG up to 250 kcmil of both Aluminum and Copper Conductors for mounting upon a single post 5/16" stud.
On Tower Installations, this lug is usually mounted using the section joint bolt, replaced with one 1/4" longer in length to account for the 1/4" Tab thickness of the lug, then connecting the Ground Wire conductor from the Tower base to the Ground Rod or Array.
View/DownloadMasting Accessories
Antenna Mast Accessories that include; Replacement and Supplemental Mast Guy Rings, Grounding Wire, Blocks, Clamps, Connectors and Rods, Mounting Screws, Pitch Pads, Silicone Sealant and Tape, Down Guy and Cable Guards. Though most Mounts come with the minimal amount of Requisite Hardware, it by no means accounts for all Mounting Options, Materials and Custom Installation Scenarios. Take a moment to Consider the Options and Materials available for use.
Read More Product Descriptions Below.
Tape and Sealant Products
Silicone Sealant is the go-to for most complex sealing spaces and can be used on connections and entryway passages, providing the Surface is none oily, clean and dry. Most all Silicone products provide an inherent UV ray protection to provide long life reliability.
Butyl Tape is a kind of adhesive tape with strong adhesive and excellent sealing effect. It adopts butyl rubber, poly isobutene as major raw materials blending, and then the surface attached to isolation paper, shape it in roll. It has good waterproof performance, so it is also known as butyl waterproof sealing adhesive tape. Single sided Mainly used in the seal of cable connectors.
PVC Insulating Tape is used to create an air-tight seal on connectors and is water, chemical and UV resistant.
Self-Amalgamating Tape is designed to be a stand-alone weatherproofing solution. AKA "Cold Shrink Tape", it has the ability to "weld" itself chemically and mechanically into a mass with no layers, to form a watertight skin. Cold Shrink Tape was developed in collaboration with international electrical engineers. Exceptional quality control procedures are strictly applied throughout the manufacturing process ensuring a tape that delivers high performance, reliability and flexibility for a wide variety of applications.
When applied under tension, Cold Shrink Tape provides a neat, void free, continuous wrapping, without the need for external heat or pressure. It can be easily applied by hand, contouring closely to irregular shapes or bends to form a permanent insulating layer or waterproofing barrier. In addition, when cut, Cold Shrink Tape can be removed cleanly, facilitating easy access and inspection of the protected area. Service life for Cold Shrink Tape is projected to be several years when exposed to out-of-door conditions, and equal to cable life in enclosed locations.
Grounding Accessories
Commensurate with Coaxial Cable TV Antenna and Satellite TV Splitter Installation, you want to Ground your Antenna Mast or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your Satellite Receiver and TV Set(s). The Integral Grounding Block designed onto most Outdoor Use Compatible Satellite Signal Splitter we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Satellite TV, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.
From component parts to simple Ground Kits; we offer Various clamps to bond with and/or attach grounding wire to; the Antenna Mast, its appurtenances, coax and ground wire connections through and to either a ground rod, Box, Junction or Pipe, as well as common ground planes established by other Utilities. Ensuring that all metal used in your installation has a connection and pathway to ground assures no electrical isolation that could result in damage or injury,
Ground Blocks and Proper Grounding are an Important, often overlooked, aspect of Your Over-all Cable TV, HDTV or Satellite Antenna Installation and Safety. Proper Grounding can also Reduce the Reception of Interfering RF Signals. Grounding of Masts, Antennas, Cable TV and other RF Distribution Systems are covered by the NEC. Grounding can be as simple as a 12 AWG Ground Wire connected a short distance away to a 8 foot 5/8" DIA Copper Ground Rod (not supplied) or Bonded to the Existing Power Ground by the Power Meter installed on the side of your Home or Office. You may notice that most new Cable TV, Satellite and TV Antenna Installations are effected in this Manner. However, most State and some Local codes will contain requirements that supersede that of the NEC. Please Refer to Your Local Building and Electrical Codes.
Down Guy and Cable Safety
We offer Yellow Plastic Guy Guard to Warn and Protect not only the Public at large, but your installation as well. We also have Yellow Corrugated Loom Tubing that is pre-slit to aid in installation after the fact in protection of wire and/or cable from casual contact damage.
