Thomas & Betts G5 5/8 Inch Ground Rod Clamp
TnB TNB4014 G5 5/8 inch Bronzed Ground Rod Clamp
Appears on the DISH Network Approved List!
Cast of high-strength corrosion-resistant Bronze. UL listed for direct burial. Furnished with hex head bolts. Simplified, compact design makes lasting, trouble-free connection for Wire Range #10 Solid through #2 Stranded. Suitable for burial after attachment (see our self amalgamating tape sealant). Use for REV. F Grounding of Tower Base and Down Guys or Telescopic Antenna Masts onto 5/8 ground rods. Select Ground Rod length by application (see details).
REV. F Tower Grounding kits are based on 8 foot ground rod use, REV. G Tower Grounding Kits use 10 foot ground rods (that can only be shipped LTL Freight). REV. F Tower Grounding Kits use #4 Solid or Stranded Copper (use a regular 5/8 inch ground rod clamp), whereas REV. G Tower Grounding Kits rely on 7/16 inch Galvanized Steel Wire Rope (select the 3/4 inch ground rod clamp we sell here).
DownloadIn-line Drop Cable TV Bandpass Filters
Filters that are typically Notch (Channel Removal), Band Pass (Pass Specific Range) or Pass Band (Pass all BUT a Specific Range). If Installing a Filter that will affect an entire Network, it is best to install at Amplifier Input versus Output. Notch Filters are part of but not completely effectual alone for Channel Elimination. Common Band Pass and Pass Band Filter examples are Diplexers and Separators. Very Few Filters handle Voltage Pass, be Careful to ascertain their Capability prior to Use.
