Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

Tower Side Arm Mount

Manufacturer Code3S-MT
AvailabilityUsually ships in 24 Hrs
ShippingCan ship anywhere


Hot Dip Galvanized
With Clamp Hardware
Supports Antennas

Note: This Bracket is made by 3 Star

Made in the USA!Made in USA 

Bulk Quantities Available Here!

3S-MT Side Arm Antenna Mount Tower

Made in the USA! Side Arm Mount for lightweight broadband, WiFi , scada and two-way antennas.   Made to fit 25g,45g,55g & 65g towers. Extends off the tower Leg .Hot Dipped Galvanized with Grade 5 Bolts & saddle Clamps

Includes :

HDG Angle Mount

HDG Saddle Clamp

3/8" x 2-1/2" HDG Full Tread Bolt Assembly

Mounting Tube ( Optional Sizes Available ) 

Note: This Bracket is made by 3 Star

This Mount is the Real Deal for WiFi , Cellular, Broadband, HDTV, Business Band, Wireless Internet, SCADA and any Antennas requiring a Mounting Pipe ( Optional Sizes Available ) American Steel... , Buy American.
Specification Sheet
Product Data Sheet
Rate this product.
Product isn't rated yet. Write a review.

It is Important to choose an Antenna Mount and Wall Mounting Location with a Picture of the Finished Antenna Installation in Mind. Be Sure to First select a location that lends itself to applying a Vertical, Cantilevered, Twisting Load without Compromising the Integrity of the Wall Material you affix to. Most Modern Exterior Decorative Wall Finishes most often do not have the Strength to Hold the Weight and Pressure of a Large TV Antenna under Wind Load without fail. Beams and Studs within the Wall are an Absolute Must to Locate when the Wall Composition is anything other than Solid wood or Concrete. Attach to these Strength Members. Further, Think about what's underneath the Wall exterior. Is it stronger, will it yield to Pressure over time as well? Sandwich additional Material (wood or steel) to the backside or both sides of the wall at the points where the mount attaches, as to distribute the load on relatively weak wall materials and to dampen vibration from Wind. Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification. Further, the NEC (National Electrical Code partly defines a good Ground connection as being as short as possible, you must affix a connection to a good Earth Ground prior to Premise entry or Bond to an existing one.

Products   Recently Viewed