3 Star Inc
Made in the USA!
This 25MT Mount is a Heavy Duty Assembly comprised of (2) 2.00" inch HDG Angle Iron crossmembers, each 4' feet long (48" inches), that on one side, perpendicularly cross and clamp to the two Rails of Any 25G Tower Series Section Face, parallel to each other with about 3'-4' feet spacing between them. On the other side, at the extended Crossmember ends, braces a 4'-5' foot Mast Pipe (Typical, Pipe OPTIONAL) resulting in an approx. 23-1/2" inch Stand-Off (Rail Center to Mast Pipe Center) on one Side of the Tower Section Face.
The The Assembly can mount an Antenna Mast Pipe diameter of 1-1/2 to 2-7/8 OD. on one side
The Angle Iron, OPTIONAL Mast Pipe and Saddle Clamps that Attach them all are Hot Dip Galvanized, and the Bolt Hardware is HDG Grade 5. These Single Side Arm Mounts are intended for Light Weight Broadband, WiFi ,SCADA and Narrow Beamwidth Two-way Antennas.
Will Fit most ROHN, Nello and American Towers G-Style Communications Tower Series.
A Product of 3 Star Inc
Includes:
(2) -4' L x 2.00" W x 3/16" Thick HDG Angle Iron Rail Mounts
(6) -HDG 3.50" inch Saddle Clamps
(12)-3/8" x 2-1/2" HDG Full Tread Bolt Assembly
Optional Mounting Pipe Sizes Available:
(1) -4' foot x 1.50" OD 14 Gauge HDG Pipe
(1) -4' foot x 2.00" OD 14 Gauge HDG Pipe
(1) -4' foot x 2.38" OD 14 Gauge HDG Pipe
RG59 Siamese with Messenger, is the choice for CCTV installations. Make your installations easier by carrying video signal and power to your equipment. Power Wire Included
This Cable features an 18 AWG power wires sheathed to the outside of the coax.
The 95% Copper Clad Aluminum Braid protects the Video signal from external EMI and RFI. Same Solid Bare Copper (SBC) Center Conductor, but Pay less with 95% Copper Clad Aluminum Braided shield. The outside of the cable uses PVC with added UV inhibitors. for great overall performance. This wire is also messengered for easy pole to pole, building to building aerial installation.
This cable comes on a quality wooden 1000' spool and has convenient footage markings on the cable, making installation a snap.