3/16"-1/4" CFG Fist Grip Clamp for Strand Guy Wire with 3/8" Thread HDG
3 Star Inc
The 3/16-1/4 CFG is a forged steel cable clamp, Hot Dip Galvanized, with 3/8" threaded closures for use on 618 stranded Wire Rope, 3/16" to 1/4" EHS Strand for Poleline and Communications Tower Down Guys. Use (3) of these in succession on both Turnback (Looped Back onto Itself) Termination ends of Wire Rope or EHS Strand when attaching to Guy Brackets and Anchors respectively. Used for Antenna Tower Down Guys in both Temporary and Permanent Scenarios. Recommended for use with 1/4" to 5/16" Heavy Open Eye Thimbles to form the loop end.
(Part Numbers 1/4THH & 5/16THH are Separate Items)
Click on the "Specification" Tab above for Installation Guide pdf.
Consult the "Knowledge Base" in the Menu Bar at the top of the page for Links to the ROHN Catalog for 25G 45G 55G 65G Tower Guy wire Details at Various Wind Loads.
Compare to ROHN R-3/16CCF, Texas Tower 3/16CCM and Antenna Systems 3/16CCM and 3/16CCF!--->
DownloadWire Rope & Guy Wire Clamps
When you need strength and durability, 3 Star Inc has the guy wire rope clamps and thimbles to help make strong and secure guy wire rope ends when turning back to form your loop. We carry all the sizes you need for your guyed tower, mast pipe or telescopic pole installation, helping to make sure you get the job done. All the clamps we carry are forged steel made from the highest quality materials and are double-saddled plus the are designed to allow a full wrench swing making your retightening or disassembly of nuts even faster. We have the fastest shipping and largest selection of in stock cable clamps you can find. So go ahead order yours today!
Opened Thimbles
Thimbles are used to secure guy wire, guy cable, guy strand, guy anchors & rope. They offer longer service life and greater protection against wear and deformation of the wire rope eye. Also used with Pre-Formed Dead ends. Thimbles are available in light and heavy duty style for strength. Heavy Duty Wire Rope Thimbles are constructed of Hot Dipped Galvanized Steel for corrosion protection.
A bolt type shackle is a more secure version used in rigging that features the combination of a bolt and nut located alongside a cotter pin. With a bolt and nut securing the shackle pin, they remain closed even when subject to rotation. Shackles are used to lift, secure and rig heavy loads.
Round Pin Shackle :
Round pin shackles consists of a round unthreaded pin that easily slides through the ears of the shackle and is secured in place with a cotter pin. They work well in applications where the pin may be subjected to torque or twisting. They are mostly used in tie-down, towing, suspension or applications where the load is strictly in-line.
Sorry, we are offline,
click here to send us message
