2-3/8" to 3-1/2 inch OD Pipe to Pipe, Pole or Tower 90° Crossover Plate Kit 3S-2030

3 Star Inc 2020 2-3/8" to 2-3/8" inch OD Pipe to Pipe, Pole or Tower 90° Crossover Plate Kit
This 3S-2020 Heavy Duty Pipe to Pipe, Pole or Tower Perpendicular Cross-over Plate Kit mounts a 2-3/8" inch OD Pipe or Antenna Mast Pole at 90 degrees to another 2-3/8" inch OD Pipe, Tube or Round Tower member component via Hot Dip Galvanized (HDG) U-Bolts, and clamping them together to a 3/8" inch thick, 6.00 x 8.00 inch HDG 3S-SCX2 Crossover Plate. This is typically used for the mounting of Conduit on a Tower, Building or Roof, as well as Antenna(s) (TV, Wireless Internet, Cellular Gateway, MIMO, DBS, Satellite, Microwave, Panel, Dish and Array) usually attached to other masts and pipe, Tower legs, Railings, Balconies, Roof Tops, etc.

3 Star Inc 2025 2-3/8" to 2-7/8" inch OD Pipe to Pipe, Pole or Tower 90° Crossover Plate Kit
This 3S-2025 Heavy Duty Pipe to Pipe, Pole or Tower Perpendicular Cross-over Plate Kit mounts a 2-3/8" inch OD Pipe or Antenna Mast Pole at 90 degrees to a 2-7/8" inch OD Pipe, Tube or Round Tower member component via Hot Dip Galvanized (HDG) U-Bolts, and clamping them together to a 3/8" inch thick, 6.00 x 8.00 inch HDG 3S-SCX2 Crossover Plate. This is typically used for the mounting of Conduit on a Tower, Building or Roof, as well as Antenna(s) (TV, Wireless Internet, Cellular Gateway, MIMO, DBS, Satellite, Microwave, Panel, Dish and Array) usually attached to other masts and pipe, Tower legs, Railings, Balconies, Roof Tops, etc.

3 Star Inc 2525 2-7/8" to 2-7/8" inch OD Pipe to Pipe, Pole or Tower 90° Crossover Plate Kit
This 3S-2525 Heavy Duty Pipe to Pipe, Pole or Tower Perpendicular Crossover Plate Kit mounts a 2-7/8" inch OD Pipe or Antenna Mast Pole at 90 degrees to another 2-7/8" inch OD Pipe, Tube or Round Tower member component via Hot Dip Galvanized (HDG) U-Bolts, and clamping them together to a 3/8" inch thick, 6.00 x 8.00 inch HDG 3S-SCX2 Crossover Plate. This is typically used for the mounting of Conduit on a Tower, Building or Roof, as well as Antenna(s) (TV, Wireless Internet, Cellular Gateway, MIMO, DBS, Satellite, Microwave, Panel, Dish and Array) usually attached to other masts and pipe, Tower legs, Railings, Balconies, Roof Tops, etc.

3 Star Inc SCX4 2-3/8" to 4-1/2 inch OD Pipe to Pipe, Pole or Tower 90° Crossover Plate Only
This 3S-SCX4 Heavy Duty Pipe to Pipe, Pole or Tower Perpendicular Cross-over Clamp Plate is used to mount from a 2-3/8" to 4-1/2" inch OD Pipe or Antenna Mast Pole at 90 degrees to another 2-3/8" to 4-1/2" inch OD Pipe, Tube or Round Tower member component via Hot Dip Galvanized (HDG) U-Bolts (Not Included), clamping to this 3/8" inch thick, 7.00 x 8.75 inch HDG 3S-SCX4 Crossover Plate. This Mounting Plate is only one of the components of the 3S-2030, 3S-2040 and 3S-2530 Kits typically used in the mounting of Conduit on a Tower, Building or Roof, as well as Antenna(s) (TV, Wireless Internet, Cellular Gateway, MIMO, DBS, Satellite, Microwave, Panel, Dish and Array) usually attached to other Masts and Pipe, Tower legs, Railings, Balconies, Roof Tops, etc.

3S-4240  Round Galvanized U-Bolt Assembly 1/2 x 2-12 x 4

U-Bolt  ,Round Bend , Hot Dipped Galvanized , includes HDG washers and nuts

3S-4355  Round Galvanized U-Bolt Assembly 1/2 x 3-5/8 x 5

U-Bolt  ,Round Bend , Hot Dipped Galvanized , includes HDG washers and nuts