FRMA Satellite Dish Antenna Mast Adaptor Converts 2.00" Mast to 2-3/8 inch OD
VMP
Converts a 2.00 inch OD mast pipe to a 2.375 inch OD Mast Pipe Diameter ideal for HughesNet, DirecWAY, StarBand Satellite Dish and Microwave Antenna Mounting. A VMP Product that is constructed of steel, Powder-coated to match the VMP Non-Penetrating Flat Roof Mount Product Line.
The FRMA is an adaptor to convert an FRM-200 to a 2.375” OD masting. Simple to install and use the FRMA just slides over and existing assembled FRM-200 mast to convert the mast to a larger OD. This Non-Penetrating Mount Series from VMP is finished with a dark brown weather resistant powder coat inside and out that blends well with residential environments. The 2.375, 2.38, 2-3/8 inch Diameter Pipe size mounts HughesNet, DirecWAY and STARBAND Satellite Internet Dish Antenna, PR-TV and some SCALA UHF Antenna, Andrew, Gabriel and Blonder Tongue Microwave Parabolic Reflector Antennas. I have enjoyed Installing this product line for Dish applications from Business and Internet on the tops of tall buildings to HD TV and zillions of channels for in-home use. And as with all items in this Product Line, Screws and Pitch Pads are included for Bolt-down versus Ballast applications. The Length of the mast is 30 inches based on engineering that incorporates consideration for typical Satellite Antenna Wind-load versus the Ballast that would keep either on target with minimal deviation and flex. As with all Ballast mounts, Structural Engineering consultations are recommended for all Roof Applications.
Download
*Redesign Difference from Legacy "RT" to New "RTL" Towers*
The "RT" Series Tower Sections had cross bracing segments that spanned from one Tower Section to the next.
The "RTL" Series Towers Sections feature cross bracing that starts,stops and is contained within the same Tower section; making it easier to assemble a complete tower section on the ground for lifting and easier attachment/fitting onto the next Tower Section during erection.
The ROHN RTL Series Self-Supporting Towers
Quick Links
About The Rohn RTL Series Tower
The ROHN Pre-engineered RTL towers consist of three standard series Light, Medium and Heavy. The standard Rohn RTL tower series can be used for Risk Category I, II, Ill and IV structures and have been designed for multiple uses including:
- Cellular, PCS and Other Two-way Communications Towers
- Microwave
- Public Safety
- Broadcast
- Surveillance & Security Camera Mounts
- Weather Stations
- Sports Lighting
Available Accessories
Rohn also offers a wide variety of accessories designed to be used with the Rohn RTL towers including:
- Tower Antenna Mounts
- Tower Side Arms,
- Tower Dish Mounts,
- Tower Platforms,
- Lighting & Grounding Accessories,
- Tower Climbing Ladders,
- Waveguide Ladders,
- Safety Climbing Devices,
- Mounting Frames,
- Ice Shields
Rohn RTL Tower Features
The benefits of choosing the ROHN Standard Series RTL towers can result in rapid deployments with significantly reduced shipping and installation schedules. Plus all RTL Towers include these great features
- Standard Series available in heights from 40' up to 190'
- High strength 50,000 psi (50 ksi) legs, angle bracing and connection plates
- High strength structural bolts
- Round legs for easy mounting of antennas, mounts and other accessories
- Compatible with ROHN Standard accessories
- Hot-Dip Galvanized after fabrication for unmatched corrosion protection
- Open cross section at ends of legs for complete galvanizing protection
- Knockdown bolted construction for efficient shipping, assembly and future upgrades
- Complete assembly drawings package provided with the tower
- Standard and site-specific foundation designs available upon request
- PE Certification available for standard or site-specific applications
- Custom tower designs available for heights up to 350', upon request
