Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

RG11 Plenum Rated Coaxial Cable 95% Braid 1000 Feet

Manufacturer Code107-1034/R11PBK
AvailabilityUsually ships in 24 Hrs
ShippingCan ship anywhere

RG11 95% Shield
14AWG Copper Clad Steel Conductor
Plenum Rated Jacket
Impedance: 75 OHM
Sequential Foot Markers
1,000' Reel

Bulk Quantities Available Here!

VC 107-1034/R11PBK 1000' Reel RG11 95% Braid Plenum Coaxial Cable

RG11 Plenum Rated Cable is made of Fire Retardant Materials, will not burn easily nor emit toxic fumes when exposed to extreme heat. Because of these requirements, Plenum cable is more expensive than non-Plenum cable and Should be used to State and Local Building Codes. Only there will you find what They consider to be Plenum spaces. This Cable is a little more Economical as it has a Standard 95% Tinned Copper Braided Shield as opposed to more Expensive Quad Shield. Consisting of 14awg Solid Bare Copper Conductor , encased in a Black Plenum Low Smoke PVDF ( CMP Rated ) Jacket. Professional Grade Plenum Rated Jacket RG11 95% Braid cable is ideal for distributing signals from roof antenna, cable TV and satellite TV. ,and hidden space within a building which is used for HVAC (Heating, Ventilation, and Air Conditioning). Our cable is swept tested  to ensure high performance. UL Listed. With its low smoke Plenum Jacket (CMP), it can be installed in air plenums and ducts in accordance with NEC Article 800...
Plenum (CMP Rated)
Rate this product.
Product isn't rated yet. Write a review.

RG6 (RG-6) with 60% Braided Shield coverage is the most commonly used form of this Utility Cable. The Variants within this sub-category usually are denoted by differences in Center Conductor and Shield Material Composition. Starting first with the Shield, Aluminum Braid will be used in concert with a Aluminum Foil Layer bonded to the Dialectric surrounding the Center Conductor. This the most common variant within the variety and is appropriate for most uses. The limiting factor in its use will be the density and strength of interfering carriers found ambient in the environment of use. 60% Braid coverage is not recomended for lengthy networks or distribution systems in Hotels, Motels and Apartment Complexes as these environments are open to reception of frequencies being re-used over the air, coupled with the antenna radiation-like properties of large distribution networks with poor Grounding. Copper Shielding with the same 60% Braid Coverage does perform better in these environments due in part to its lower DC Loop Resistance. Whereas Aluminum Braided Shield usually goes hand in hand with Copper Clad Steel Center Conductors, likewize goes Copper Braided Shield with Solic Copper Center Conductors. Copper Clad Steel will suffice in almost any utilization scenario, however most Satellite TV Operating companies will require Solid Copper Center Conductor to be used by their respective Sub-Contractor Installers for Maintainence and Warranty issues. This is due to the DC Voltage component being fed from the Receiver back to, and Powering the LNB(f)s mounted on the Satellite Dish. Unless the run is extremely long and the connectors applied are of dubious Quality, the DC Loop Resistance difference between Solid Bare Copper and Copper Clad Steel is negligible in short distances.

Products   Recently Viewed