Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

ROHN RSL 20 Foot Heavy Duty Angle Brace Tower Kit - RSL20AH12

Price$1,270.00
Manufacturer CodeRSL20AH12
Anchor:
Qty
AvailabilityItem Ships 3 to 5 days .
ShippingCan ship Canada

Highlights

-Available in heights from 20' up to 100'

-U-shaped legs allows for simple lap splice connection

-Available in standard and heavy models

-Pre-punched holes for attachment of safety climb systems, mounting kits, etc.

-Braces for each section are the same length, while bolt lengths are standard throughout the tower

-Tower material is hot-dip galvanized

-Assembly drawings provided with tower

-Top closing Tube standard with each tower package

Bulk Quantities Available Here!

ROHN RSL20AH12 Complete 20 Foot Heavy Duty Angle Bracing Tower

U-Shaped Legs allows for simple lap splice connection. Pre-punched holes for attachment of safety climb systems, mounting kits, etc., braces for each section are the same length, while bolt lengths are standard throughout the tower. Tower material is Hot-Dipped Galvanized, Assembly drawings provided with tower, top closing angle standard with each tower package.

 

Structure Classification – 11
Exposure Category – C
Topo-Graphic Category - 1
3-Second Gust Wind Speed -w- Ice - 40 MPH
Design Ice Thickness - 1"
Earthquake Spectral Response Acceleration - 2.5015555
Heavy Tube Bracing Dish Loading

 

This Kit Includes

RSL20AH12

20 Foot Heavy-Duty Angle Bracing Tower

Sections

R1AH – Heavy Duty (Angle) Section 1

R2AH – Heavy Duty (Angle) Section 2

Bolt Kits

2

Top Kit

RSLH1A

ACWS Anti-Climb Warning Sign

Assembly Guide

                                    OPTIONS     

Short Base

RSB02

Anchor Bolts

RAL02

Grounding Kits

Grounding Kit (3 Leg)

Grounding Kit (1 Leg)

RGKG

RGKG-1

 

 

Site-specific designs are available upon request


 


Optional Accessories are available and may be ordered separately:

 

Note

*Per Rev G requirements, any structure greater than 10', requires a climber safety device.

 

Self-Supporting Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the weight of the Foundation and the cohesiveness of the soil to prevent the chance of tower tip over, as well as the strength of the tower members to withstand these Forces against them.

 

 

ROHN Tower Kits are designed based on assumptions made regarding Wind Speed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, fill out this form and send it to support@3starinc.com

 

Rate this product.
Product isn't rated yet. Write a review.

Heavy Angle Bracing section drawing and table
RSL TOWER DESIGN LOADING
HEAVY ANGLE BRACING
ACCORDING TO ANSI/TIA-222-G
  • Structure Classification = II
  • Exposer Category = C
  • Topographic Category = 1
  • 3 Second Gust Wind Speed With Ice = 40 MPH
  • Design Ice Thickness = 1.0"
  • Earthquake Spectral Response Acceleration, Ss = 2.50
RSL - D06 RO
Height Sections High Performance Dish located 10 below tower top Tower Kit Allowable EPA
3    Second Gust Wind Speed
90 100 110 120 130 140
90 RA2H-RA10H HP2 RSL90AH20 0 - - - - -
80 RA1H-RA8H HP2 RSL80AH18 0 - - - - -
RA2H-RA9H HP2 RSL80AH29 12 - - - - -
RA3H-RA10H HP4 RSL80AH30 6 - - - - -
70 RA1H-RA7H HP2 RSL70AH17 6 - - - - -
RA2H-RA8H HP2 RSL70AH28 17 5 - - - -
RA3H-RA9H HP2 RSL70AH39 28 14 4 - - -
RA4H-RA10H HP4 RSL70AH40 21 8 - - - -
60 RA1H-RA6H HP2 RSL60AH16 20 10 - - - -
RA4H-RA9H HP4 RSL60AH49 39 22 10 - - -
RA5H-RA10H HP4 RSL60AH50 43 26 13 - - -
50 RA1H-RA5H HP4 RSL50AH15 29 15 4 - - -
RA5H-RA9H HP4 RSL50AH59 68 46 31 20 10 -
RA6H-RA10H HP4 RSL50AH60 74 50 34 22 12 5
40 RA1H-RA4H HP4 RSL40AH14 50 34 22 13 6 -
RA7H-RA10H HP4 RSL40AH70 80 80 67 50 37 27
30 RA1H-RA3H HP4 RSL30AH13 80 62 47 35 27 20
RA8H-RA10H HP4 RSL30AH80 80 80 80 80 68 49
20 RA1H-RA2H HP12 RSL20AH12 80 80 80 74 60 47
RA9H-RA10H HP13 RSL20AH90 80 80 80 80 80 67