Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

ROHN 25G Adjustable House Bracket HB25AG 0-15"

Price$139.45
Manufacturer CodeHB25AG
Qty
AvailabilityUsually ships in 24 Hrs
ShippingCan ship anywhere

Highlights

Hot Dip Galvanized
Bolted Joints
Rail Clamps included
Can be used in:
Bracketed Config.s

Bulk Quantities Available Here!

ROHN HB25AG 15 inch Adjustable House Bracket
for Standoff up to 15 inches. This ROHN Tower HB25AG wall bracket offers greater support for Guyed and Bracketed ROHN 25G Tower installations and is adjustable up to 15 inches. Comes with Adjustment Bolts and Rail Clamps. The ROHN 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN Tower catalog. Consult ROHN Catalog Links at Footer Section below for ROHN 25G Tower Details.

spec. sheet



Spec. Sheet


Get Adobe Reader

 

 

 

 


ROHN Produces this series of Brackets specifically for the 25G Tower in exterior wall mount applications. Sturdy and Adjustable, this galvanized American Steel bracket is no comparison to the ROHN Clone brackets you may find at other Sites. Buy ROHN, Buy American.

 

 

 

 

3d view icon

While holding the mouse pointer over the 3D object, click and hold one of the 3 mouse buttons at the same time moving the mouse to navigate.
Left Button: Orbits or Rotates the camera. Right: Pans the camera. Mouse Wheel/Middle: Zooms camera in/out.

3d orbit icon
Loading 3D
Auto Rotate Panning Zooming
Rate this product.
Product isn't rated yet. Write a review.

It is Important to choose an Antenna Mount and Wall Mounting Location with a Picture of the Finished Antenna Installation in Mind. Be Sure to First select a location that lends itself to applying a Vertical, Cantilevered, Twisting Load without Compromising the Integrity of the Wall Material you affix to. Most Modern Exterior Decorative Wall Finishes most often do not have the Strength to Hold the Weight and Pressure of a Large TV Antenna under Wind Load without fail. Beams and Studs within the Wall are an Absolute Must to Locate when the Wall Composition is anything other than Solid wood or Concrete. Attach to these Strength Members. Further, Think about what's underneath the Wall exterior. Is it stronger, will it yield to Pressure over time as well? Sandwich additional Material (wood or steel) to the backside or both sides of the wall at the points where the mount attaches, as to distribute the load on relatively weak wall materials and to dampen vibration from Wind. Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification. Further, the NEC (National Electrical Code partly defines a good Ground connection as being as short as possible, you must affix a connection to a good Earth Ground prior to Premise entry or Bond to an existing one.

Products   Recently Viewed