ROHN UHF25G Side Arm Antenna Mount of CB/HAM/Marine Radio Whip for 25G Tower
ROHN
Made in the USA!
This UHF25G Single Side Arm Mount is used for UHF/FM/CB/HAM Whip, Cell Data, Internet, Telemetry, Business Band Radio and other Light Duty Antennas. Fastens with Saddle Clamps. Projects your mast held in the clamp (up to 1.25 inches in Diameter with bolts supplied) to distance of 12 inches from the tubular side rail of the tower face to which it is attached.
If there is any question of flexion in this mount, get two of them and clamp your mast with some distance between the two. The mount is 7/32 inch thick (almost 1/4) and is just about an inch wide. It's Hot Dip Galvanized, it's tuff stuff. The ROHN 25G tower is a popular choice for large VHF/UHF antennas and medium sized HF antennas. ROHN Produces this UHF and FM Whip Antenna Mount specifically for the 25G Tower. Saddle Clamp for the Antenna Post, "U" Bolts secure the mount to the ROHN 25G Side Rails.
ROHN Tower Antenna Mount and Assemblies
ROHN Tower Antennas Mounts for All Series. Select by the ROHN Tower Series and choose between Tower Top Antenna Mounts, Tower Apex Antenna Mounts, Tower Side Arm Antenna Mounts with or without Tiebacks and Tower Face Antenna Mounts. These Mounts will differ based on the Type of Antenna, the Size of the Mast Pipe, Pole or Tube it is designed to be Mounted on and the Tower Leg Size it will be Mounted to. These Mounts were Primarily Engineered for ROHN G Series to include 25G 45G 55G 65G, RTL Towers, RSL Towers and SSV Towers. As there are Other Manufacturers with Similar Engineering in Their Communications Tower Series, you would find that some of the Antenna Tower Mounts will fit other Branded Towers as well.
Sorry, we are offline,
click here to send us message
