ROHN Universal Roof Mount Base for ROHN Telescopic Antenna Mast Pole R-ETMB
ROHN
Made in the USA!
This Universal Roof Mount Base for ROHN Telescopic Antenna Mast Poles fits all of the ROHN Series (H20, H30, H40, H50) Telescopic Antenna Mast Poles to mount on any Roof, providing your installation assures both mechanical and vapor barrier integrity. The Bottom of Mast Inserts into the Hinged Clamp, Adjustable for Antenna Masts up to 2.5 inches in Diameter. Bonding should be made by affixment to Mast.
Manufacturers recommend that masts heights of 10 feet and higher above the uppermost bracket be guyed for Addition Wind Load Support. Bonding/Grounding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance
This Hinged Roof Mount for Telescopic Push-up Antenna Masts can also be used to help roof mount regular 5 foot by 1.25" Diameter masts singular or Multiple Swaged segments. One piece sections of 1.5" Diameter antenna masts of varying lengths can be used with this mount. As with all Masts, Guy wire support and Grounding are Critical to Antenna Survival.
Antenna Mast Roof Mounts
There is no substitute of height, clear line-of-site and size does matter... The higher the frequency, the higher the loss... Amplifiers do not give you something that you didn't have already...
The first key to any reception is to get above obstructions that exist between you and your target, as radio frequency reception of any kind (satellite, microwave, Radio and TV) are for the most part "Line-of-Sight" dependant. The fact that some receptions occur without line of sight is due to phenomenon not applicable in this discussion. As you increase your target distance, you increase the territory you must account for in maintaining line-of-sight.
What tall building and air traffic exist in this corridor, no one can account for. Aircraft are very good at messing up reception for a number of reasons, even when flying way above the path, again removed for clarity in this discussion. Height, is therefore key in optimizing your ability to capture the best line-of-sight possible to your target.The Roof of any Building of Home provides a Logical Platform of Height in which Line-of-Sight is more likely to occur, or from which, more height can easily be obtained.
These Mounts are Quality made by Manufacturers with a History in the Field of Proven Success and Longevity. Whether you are planning to Install your Antenna and Mount to the Roof Peak, Gable, Vent Pipe, Chimney or Pitch, Please plan your installation to Minimize the Structural and Asthetic Impact to your House or Building, research and follow all applicable Local Building Codes and annex the appropriate Structural Engineering Assistance when utilizing Non-Penetrating Mounts with Concrete Cinder Block Ballast on any Flat or Pitched Roof.
Sorry, we are offline,
click here to send us message
