Your Cart

Your shopping cart is empty!

Rohn 3/8TBE&J Turnbuckle 3/8 x 6 inch Round Eye to Jaw

ROHN R-3/8TBE&J 3/8" x 6" Round Eye to Jaw Turnbuckle

View Larger Image

Price$37.95

Manufacturer CodeR-3/8 TBE&J-6

Qty

Add to Cart View Cart Shipping Calculator

AvailabilityItem Ships direct from Rohn, 1 to 2 weeks .

Highlights

Heavy Duty
1200 lbs. Working Load Limit
6,000 lbs. Ultimate Strength
HDG Weather Resistant

ROHN R-3/8 TBE&J-6 Turnbuckle for Tower Down Guy 3/8" x 6" Round Eye to Jaw
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Galvanized, Round Eye, Open Body, Working Load Limit: 1200 lbs. Ultimate Strength: 6000 lbs.

FEATURES
Turnbuckles are used as adjustable extension links to maintain proper tower clearance on assemblies at tower end. The body of the turnbuckle is reverse thread on opposite ends to allow tightening/loosening by simply turning the body of the turn buckle. Made of galvanized steel, our turn buckles are built to last and weather resistant .

SPECIFICATIONS

Item#

3/8" TBE&J

Product Name

Turnbuckle, Eye and Jaw, Galvanized, 3/8" x 6"

Type

Eye and Jaw

Diameter

3/8 "

Take-up

6"

Closed Length

12"

Working Load Limit

1200 lbs. (5 to 1 Safety Factor)

Material

Forged Steel

Finish

Hot Dip Galvanized

Specification

Federal Spec FF-T-791B Type 1 Form 1

Typical Use: For attaching and tensioning ROHN Tower Down Guy Terminations when utilizing 3/16" Strand (via 3/16" Pre-formed Dead-End with 5/16" Thimble or 3/16" Cable Clamps with 3/16THH Thimble), 1/4" Strand (via 1/4" Pre-formed Dead-End with 5/16" Thimble or 1/4" Cable Clamps with 1/4THH Thimble), or 618/620 Bare Wire (via Cable Clamps or Gripple with 1/4THH Thimble) through the Eye, with the Jaw affixed to an anchor with an Integral Down Guy Equalizing Plate (like the GAC3455TOP and GAC5655TOP), or through a Closed Single Eye Anchor (like the GAS4303 and EZ 30)
Will NOT fit the GAR30 Anchor as it is designed to accommodate Equalizer Plate attachments for Multiple Down Guys.
Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.

Specification Sheet

Spec. Sheet

Download

Antenna Guy Wire for Guyed Towers & Telescopic Masts

3 Star Stocks EHS 7 Strand Guy Wire for use on ROHN 25G, 45G, 55G and 65G Guyed Towers Systems as well as Utility OSP Cabled and Fiber Systems. Our EHS Tower Guy wire comes in 100', 250', 500',1000, in coils or reels and 5000 FT wooden spools. PLP-GWD Guy wire Dispenser available (optional). It is recommended that "Initial Tension" (10% of Maximum Limit) is attained with the Turnbuckle travel extended prior to tensioning with same. Annex the Data shown in the Table below when referencing guy charts shown for ROHN Towers:

Size

Grade

Tensile Strength/lbs.

Initial Tension/lbs.

3/16"

HS

2850

300

3/16"

EHS

3990

400

1/4"

HS

4750

500

1/4"

EHS

6650

700

5/16"

HS

5350

550

5/16"

EHS

11200

1100

3/8"

HS

10800

1000

3/8"

EHS

15400

1500

Our 6/18 (6 strand 18AWG) and 6/20 (6 strand 20AWG with or with out Plastic Coating) guy wire comes in lengths of 50', 100', 250', 500' up to 1000' FT. Choose from 6/18 and 6/20 for Guying Telescopic Antenna Masts. Also, Complete Telescopic Guy Wire Kits are also available.