ROHN Tower Guy & Anchor

Sort by:
ROHN Tower Guy & Anchor
ROHN Tower Down Guy Turnbuckle Safety Kit R-TBSAFETY
Price$19.95
Manufacturer CodeTBSAFETY
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN TBSAFETY Tower Down Guy Turnbuckle Safety Wire and Clamps Kit
Consists of 15 Foot 1/4 inch EHS Guy Wire and (2) 1/4 inch Cable Clamps to thread through Down Guy Turnbuckles as to Secure from loosening....

ROHN 3 Foot Long Down Guy Screw Anchor R-GAS4303
Price$19.95
Manufacturer CodeGAS4303
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN GAS4303 30 Inch Long Telescopic Antenna Mast Down Guy Screw Anchor
Made in the USA!Made in the USA!
Hot Dip Galvanized 30" long Single Eye Screw Anchor for Guying ROHN H20, H30 and Channel Master 1620, 1630, 1820, 1830 Telescopic Antenna Masts down to the Ground, 1/2" Rod with 3" Disk Diameter...

ROHN 4 Foot Long Down Guy Screw Anchor R-GAS604
Price$48.12
Manufacturer CodeGAS604
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN GAS604 4 Foot Telescopic Antenna Mast Down Guy Screw Anchor
Made in the USA!Made in the USA!
48" long Screw Anchor for Guying ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Antenna Masts down to the Ground, HDG, 5/8" Rod with 6" Disk Diameter, Similar to EZ48 Anchor...

ROHN 25G 45G 55G 65G Tower Concrete Guy Anchor Rod with Single Eye R-GAR30
Price$42.50
Manufacturer CodeGAR30
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN GAR30 Concrete Tower Guy Anchor Rod Single Eye
Single Closed Eye Rod for Embedment in Concrete Anchor Block for Guying Down ROHN Towers, can be Modified for Multiple Down Guy attachment with Bolt-on EP25343 or EP25345 Equalizer Plate Assembly Kits. When used as a single guy anchor, use and Eye to Jaw Turnbuckle larger than 3/8 inch...

ROHN EP25343 3 Level Guy Equalizer Plate Kit
Price$49.95
Manufacturer CodeEP25343
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN EP25343 3 Hole Equalizer Plate Attachment Kit
Attaches to GAR30 Rod or equivalent in Concrete Anchor Block to 3 Level Guy ROHN 25G 45G 55G 65G Tower. Comes with Plates, Bolts and Nuts, required to attach the Turnbuckles and Anchor Rod (Sold Separately)...

ROHN EP25345 5 Level Guy Equalizer Plate Kit
Price$69.95
Manufacturer CodeEP25345
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN EP25345 5 Hole Equalizer Plate Attachment Kit
Attaches to GAR30 Rod or equivalent in Concrete Anchor Block to 5 Level Guy ROHN 25G 45G 55G 65G Tower. Comes with Plates, Bolts and Nuts, required to attach the Turnbuckles and Anchor Rod (Sold Separately)...

ROHN 25G 45G 55G 65G Tower Concrete Guy Anchor Rod with 3 Hole Down Guy Equalizer Plate Assembly R-GAC303
Price$89.95
Manufacturer CodeGAC303
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN GAC303 Concrete Guy Anchor Rod with 3 Hole Equalizer Plate
Anchor Rod with Equalizer Plate Assembly for 2 or 3 level Down Guy Attachment via use of Eye to Eye Turnbuckles, embeds in Concrete Anchor Block for Guying Down ROHN Towers...

ROHN 25G 45G 55G 65G Tower Concrete Guy Anchor Rod with 5 Hole Down Guy Equalizer Plate Assembly R-GAC305
Price$97.95
Manufacturer CodeGAC305
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN GAC305 Concrete Guy Anchor Rod with 5 Hole Equalizer Plate
Anchor Rod with Equalizer Plate Assembly for 3 or 5 level Down Guy Attachment via use of Eye to Eye Turnbuckles, embeds in Concrete Anchor Block for Guying Down ROHN Towers...

ROHN GAC3455TOP Concrete Tower Down Guy Anchor
Price$149.95
Manufacturer CodeGAC3455TOP
Average Rating5
AvailabilityUsually ships in 3 weeks
Qty
ROHN GAC3455TOP Concrete Guy Anchor Rod with 5 Hole Equalizer Plate
Anchor Rod with Integral Equalizer Plate for 3 or 5 level Down Guy Attachment via use of Eye to Jaw Turnbuckles, embeds in Concrete Anchor Block for Guying Down ROHN Towers with 17,670 lbs. allowable load...

ROHN GAC5655TOP Concrete Tower Down Guy Anchor
Price$339.95
Manufacturer CodeGAC5655TOP
Average Rating5
AvailabilityUsually ships in 24 Hrs
Stock Level2
Qty
ROHN GAC5655TOP Concrete Guy Anchor Rod with 5 Hole Equalizer Plate
Anchor Rod with Integral Equalizer Plate for 3 or 5 level Down Guy Attachment via use of Eye to Jaw Turnbuckles, embeds in Concrete Anchor Block for Guying Down ROHN Towers with 49,060 lbs. allowable load...

ROHN GAC5755TOP Concrete Tower Down Guy Anchor
Price$795.00
Manufacturer CodeGAC5755TOP
Average Rating5
AvailabilityUsually ships in 3 weeks
ROHN GAC5755TOP Concrete Guy Anchor Rod with 5 Hole Equalizer Plate
Anchor Rod with Integral Equalizer Plate for 3 or 5 level Down Guy Attachment via use of Eye to Jaw Turnbuckles, embeds in Concrete Anchor Block for Guying Down ROHN Towers with 64,800 lbs. allowable load...

ROHN 3/16" EHS Galvanized Stranded Steel Down Guy Wire 250 feet
Price$79.95
Manufacturer Code3/16 EHS-250
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
3/16EHS-250 is 3/16" EHS Galvanized Stranded Steel Guy Wire 250 feet
Economical 250 foot length, Perfect for guying down ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 3,990 lbs. Breaking Strength...

ROHN 3/16" EHS Galvanized Stranded Steel Down Guy Wire 500 feet
Price$119.95
Manufacturer Code3/16 EHS-500
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
3/16EHS-500 is 3/16" EHS Galvanized Stranded Steel Guy Wire 500 feet
Economical 500 foot length, Perfect for guying down ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 3,990 lbs. Breaking Strength...

ROHN 3/16" EHS Galvanized Stranded Steel Down Guy Wire 1000 feet
Price$219.95
Manufacturer Code3/16 EHS-1000
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
3/16EHS-1000 is 3/16" EHS Galvanized Stranded Steel Guy Wire 1000 feet
Economical 1000 foot length Reel, Perfect for guying down ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 3,990 lbs. Breaking Strength...

ROHN 3/16" EHS 5000 feet
Price$795.00
Manufacturer Code3/16 EHS-5000
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
3/16EHS-5000 is 3/16" EHS Galvanized Stranded Steel Guy Wire 5000 feet
Economical 5000 foot length Reel, Perfect for guying down ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 3,990 lbs. Breaking Strength...

ROHN 1/4" EHS Galvanized Stranded Steel Down Guy Wire 250 feet
Price$99.95
Manufacturer Code1/4 EHS-250
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
1/4EHS-250 is 1/4" EHS Galvanized Stranded Steel Guy Wire 250 feet
Economical 250 foot length, Perfect for guying down ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 6,000 lbs. Breaking Strength...

ROHN 1/4" EHS Galvanized Stranded Steel Down Guy Wire 500 feet
Price$144.95
Manufacturer Code1/4 EHS-500
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
1/4EHS-500 is 1/4" EHS Galvanized Stranded Steel Guy Wire 500 feet
Economical 500 foot length, Perfect for guying down Taller ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 6,000 lbs. Breaking Strength...

ROHN 1/4" EHS Galvanized Stranded Steel Down Guy Wire 1000 feet
Price$269.95
Manufacturer Code1/4 EHS-1000
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
1/4EHS-1000 is 1/4" EHS Galvanized Stranded Steel Guy Wire 1000 feet
Economical 1000 foot length Reel, Perfect for guying down Taller ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 6,000 lbs. Breaking Strength...

ROHN 1/4" EHS 5000 feet
Price$895.00
Manufacturer Code1/4 EHS-5000
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
1/4EHS-5000 is 1/4" EHS Galvanized Stranded Steel Guy Wire 5000 feet
Economical 5000 foot length Reel, Perfect for guying down Taller ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 6,000 lbs. Breaking Strength...

ROHN 5/16" EHS Galvanized Stranded Steel Down Guy Wire 500 feet
Price$249.95
Manufacturer Code5/16 EHS-500
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
5/16EHS-500 is 5/16" EHS Galvanized Stranded Steel Guy Wire 500 feet
Economical 500 foot length, Perfect for guying down Taller ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 11,200 lbs. Breaking Strength...

ROHN 5/16" EHS Galvanized Stranded Steel Down Guy Wire 1000 feet
Price$464.95
Manufacturer Code5/16 EHS-1000
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
5/16EHS-1000 is 5/16" EHS Galvanized Stranded Steel Guy Wire 1000 feet
Economical 1000 foot length, Perfect for guying down Taller ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 11,200 lbs. Breaking Strength...

3/8 inch Eye to Eye Turnbuckle 3/8TBE&E
Price$9.95
Manufacturer Code3/8X6TBE&E
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 3/8TBE&E 3/8" x 6" Eye to Eye Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 1200 lbs., Ultimate Strength: 6000 lbs.
Typical Use: when attaching and tensioning ROHN Tower and Telescopic Antenna Mast Down Guy terminations (3/16" Strand via Pre-formed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, or 618/620 Bare Wire via Cable Clamps/Gripple and 1/4TH) to Equalizer Plate Anchors (Sandwich Plated like GAC305/EP25345 or GAC303/EP25343)...

3/8 inch Eye to Jaw Turnbuckle 3/8TBE&J
Price$10.95
Manufacturer Code3/8x6TBE&J
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 3/8TBE&J 3/8" x 6" Eye to Jaw Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 1200 lbs., Ultimate Strength: 6000 lbs.
Typical Use: when attaching and tensioning ROHN Tower and Telescopic Antenna Mast Down Guy terminations 3/16" Strand via Pre-formed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, or 618/620 Bare Wire via Cable Clamps/Gripple and 1/4TH) to Closed Eye or Integral Equalizer Plate Anchors (like GAS4303/EZ 30 or GAC3455). Will NOT fit a GAR30 Anchor...
1/2 x 9 inch Eye to Eye Turnbuckle 1/2TBE&E
Price$13.95
Manufacturer Code1/2X9TBE&E
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 1/2TBE&E 1/2" x 9" Eye to Eye Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 2200 lbs., Ultimate Strength: 11000 lbs.
Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations 3/16" Strand via Pre-formed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH to Equalizer Plate Anchors (Sandwich Plated like GAC305/EP25345 or GAC303/EP25343)...

1/2 x 9 inch Eye to Jaw Turnbuckle 1/2TBE&J
Price$14.95
Manufacturer Code1/2X9TBE&J
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 1/2TBE&J 1/2" x 9" Eye to Jaw Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 2200 lbs., Ultimate Strength: 11000 lbs.
Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations 3/16" Strand via Pre-formed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH to Closed Eye GAR30 or Integral Equalizer Plate Anchors (like GAC3455TOP or GAC5655TOP)...

1/2 x 12 inch Eye to Eye Turnbuckle 1/2TBE&E
Price$16.95
Manufacturer Code1/2x12TBE&E
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 1/2TBE&E 1/2" x 12" Eye to Eye Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 2200 lbs., Ultimate Strength: 11000 lbs.
Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations 3/16" Strand via Pre-formed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH to Equalizer Plate Anchors (Sandwich Plated like GAC305/EP25345 or GAC303/EP25343)...

1/2 x 12 inch Eye to Jaw Turnbuckle 1/2TBE&J
Price$17.95
Manufacturer Code1/2X12TBE&J
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 1/2TBE&J 1/2" x 12" Eye to Jaw Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 2200 lbs., Ultimate Strength: 11000 lbs.
Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations 3/16" Strand via Pre-formed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH to Closed Eye GAR30 or Integral Equalizer Plate Anchors (like GAC3455TOP or GAC5655TOP)...

5/8 x 12 inch Eye to Eye Turnbuckle 5/8TBE&E
Price$18.95
Manufacturer Code5/8X12TBE&E
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 5/8TBE&E 5/8" x 12" Eye to Eye Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs.
Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations (1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH, 5/16" Strand via Pre-formed deadend and 7/16THH or 5/16" Bare Strand, 3/8" Strand via Pre-formed deadend and 1/2THH or 3/8" Bare Strand via Cable Clamps and 7/16THH) to Equalizer Plate Anchors (Sandwich Plated like GAC305/EP25345 or GAC303/EP25343)...
5/8 x 12 inch Eye to Jaw Turnbuckle 5/8TBE&J
Price$19.95
Manufacturer Code5/8X12TBE&J
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 5/8TBE&J 5/8" x 12" Eye to Jaw Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs.
Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations (1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH, 5/16" Strand via Pre-formed deadend and 7/16THH or 5/16" Bare Strand via Cable Clamps and 3/8THH, 3/8" Strand via Pre-formed deadend and 1/2THH or 3/8" Bare Strand via Cable Clamps and 7/16THH) to Closed Eye GAR30 or Integral Equalizer Plate Anchors (like GAC3455TOP, GAC5655TOP or GAC5755TOP)...

ROHN 25G 45G 55G 65G Tower Down Guy 3/4 inch Eye to Jaw Turnbuckle R-3/4TBE&J
Price$34.95
Manufacturer Code3/4X12TBE&J
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 3/4TBE&J 3/4" x 12" Eye to Jaw Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 5200 lbs., Ultimate Strength: 26000 lbs.
Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations (1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH, 5/16" Strand via Pre-formed deadend and 7/16THH or 5/16" Bare Strand via Cable Clamps and 3/8THH, 3/8" Strand via Pre-formed deadend and 1/2THH or 3/8" Bare Strand via Cable Clamps and 7/16THH) to Closed Eye GAR30 or Integral Equalizer Plate Anchors (like GAC3455TOP, GAC5655TOP or GAC5755TOP)...

3/8 inch Eye to Eye Turnbuckle 3/8TBE&E
Price$14.95
Manufacturer Code3/8 TBE&E-6
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 3/8TBE&E 3/8" x 6" Round Eye to Eye Turnbuckle
Round Eye Turnbuckle , Forged, Hot Dip Galvanized, Open Body, Eye to Eye ,Working Load Limit: 1200 lbs., Ultimate Strength: 6000 lbs ....

3/8 inch Eye to Jaw Turnbuckle 3/8TBE&J
Price$14.95
Manufacturer Code3/8 TBE&J-6
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 3/8TBE&J 3/8" x 6" Round Eye to Jaw Turnbuckle
Round Eye Turnbuckle , Forged, Hot Dip Galvanized, Open Body, Eye to Jaw, Working Load Limit: 1200 lbs., Ultimate Strength: 6000 lbs...
ROHN 3-16 inch Big Grip Guy Wire Strand Pre-Form Dead-End BG2142
Price$6.95
Manufacturer CodeBG2142
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN BG2142 Big Grip Pre-formed Dead Ends for 3/16 inch EHS Galvanized Strand
For use when guying down ROHN Towers with 3/16 inch wire strand, 3,990 lbs. Breaking Strength...

ROHN 1/4 inch Big Grip Guy Wire Strand Pre-Form Dead-End R-BG2144
Price$8.45
Manufacturer CodeBG2144
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN BG2144 Big Grip Pre-formed Dead Ends for 1/4 inch EHS Galvanized Strand
For use when Guying ROHN Towers with 1/4 inch wire strand in both Temporary and Permanent Scenarios, 6,550 lbs. Breaking Strength...

ROHN 5/16 inch Big Grip Guy Wire Strand Pre-Form Dead-End R-BG2146
Price$9.95
Manufacturer CodeBG2146
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN BG2146 Big Grip Pre-formed Dead Ends for 5/16 inch EHS Galvanized Strand
For use when guying down ROHN Towers with 5/16 inch wire strand in both Temporary and Permanent Scenarios, 11,200 lbs. Breaking Strength...

ROHN 3/8 inch Big Grip Guy Wire Strand Pre-Form Dead-End R-BG2147
Price$22.00
Manufacturer CodeBG2147
Average Rating5
AvailabilityUsually ships in 1 week
Qty
ROHN BG2147 Big Grip Pre-formed Dead Ends for 3/8 inch EHS Galvanized Strand
For use with Guying ROHN 45G 55G 65G Towers in bothTemporary and Permanent Scenarios, 15,400 lbs. Breaking Strength...

ROHN 7/16 inch Big Grip Guy Wire Strand Pre-Form Dead-End R-BG2148
Price$26.40
Manufacturer CodeBG2148
Average Rating5
AvailabilityUsually ships in 1 week
Qty
ROHN BG2148 Big Grip Pre-formed Dead Ends for 7/16 inch EHS Galvanized Strand
For use with Guying ROHN 45G 55G 65G Towers in bothTemporary and Permanent Scenarios, 20,800 lbs. Breaking Strength...

3/16 inch End Sleeve for Big Grip Pre-Form Dead-End R-GC65303 GC-65303
Price$3.40
Manufacturer CodeGC65303
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN GC65303 End Sleeve for 3/16 inch Big Grip Pre-Form Dead-End
For use on C-Coat Galvanized Steel R-BG2142 Big-Grip Dead-ends to secure ends from tampering and unravelling...

1/4 inch End Sleeve for Big Grip Pre-Form Dead-End R-GC65136 GC-65136
Price$3.55
Manufacturer CodeGC65136
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN GC65136 End Sleeve for 1/4 inch Big Grip Pre-Form Dead-End
For use on C-Coat Galvanized Steel R-BG2144 Big-Grip Dead-ends to secure ends from tampering and unravelling...
5/16 inch End Sleeve for Big Grip Pre-Form Dead-End R-GC65128 GC-65128
Price$3.75
Manufacturer CodeGC65128
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN GC65128 End Sleeve for 5/16 inch Big Grip Pre-Form Dead-End
For use on C-Coat Galvanized Steel R-BG2146 Big-Grip Dead-ends to secure ends from tampering and unravelling...
ROHN 25G 45G 55G 65G Tower  Guy Anchor Rod
Price$8.95
Manufacturer Code5/8x12 EB
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty

Thimble Eyebolts Angle Type

Our Angled Thimble Eyebolts are made of high quality drop forged steel. The Angled Thimble Eyebolt is designed to carry loads at a 45 degree angle

10,000 lb Guy Strain Porcelain Insulator
Price$15.95
Manufacturer CodeROHN 502
Average RatingRate it!
AvailabilityCall to Order
Stock Level0
ROHN 502 Porcelain Insulator 10,000 lbs
Guy Line Insulators are used to divide guy wires into non-resonant sections. This prevents the guy lines from altering the antenna's radiation pattern due to near-field interaction...

12,000 lb Guy Strain Porcelain Insulator
Price$19.95
Manufacturer CodeROHN 504
Average RatingRate it!
AvailabilityCall to Order
Stock Level0
ROHN 504 Porcelain Insulator 12,000 lbs
Guy Line Insulators are used to divide guy wires into non-resonant sections. This prevents the guy lines from altering the antenna's radiation pattern due to near-field interaction...

20,000 lb Guy Strain Porcelain Insulator
Price$25.95
Manufacturer CodeROHN 506
Average RatingRate it!
AvailabilityCall to Order
Stock Level0
ROHN 506 Porcelain Insulator 20,000 lbs
Guy Line Insulators are used to divide guy wires into non-resonant sections. This prevents the guy lines from altering the antenna's radiation pattern due to near-field interaction...

1/2 inch Eye to Eye Turnbuckle 1/2TBE&E
Price$28.95
Manufacturer Code1/2 TBE&E-12
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 1/2TBE&E 1/2" x 12" Round Eye to Eye Turnbuckle
Round Eye Turnbuckle, Forged, Hot Dip Galvanized, Open Body, Eye to Eye, Working Load Limit: 2200 lbs
., Ultimate Strength: 11000 lbs....
1/2 inch Eye to Jaw Turnbuckle 1/2TBE&J
Price$28.95
Manufacturer Code1/2 TBE&J-12
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 1/2TBE&J 1/2" x 12" Round Eye to Jaw Turnbuckle
Round Eye Turnbuckle, Forged, Hot Dip Galvanized, Open Body, Eye to Jaw, Working Load Limit: 2200 lbs., Ultimate Strength: 11000 lbs...
5/8 inch Eye to Eye Turnbuckle 5/8TBE&E
Price$38.95
Manufacturer Code5/8 TBE&E-12
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 5/8TBE&E 5/8" x 12" Round Eye to Eye Turnbuckle
Round Eye Turnbuckle, Forged, Hot Dip Galvanized, Open Body, Eye to Eye, Working Load Limit: 3500 lbs
., Ultimate Strength: 17500 lbs....
5/8 inch Eye to Jaw Turnbuckle 5/8TBE&J
Price$38.95
Manufacturer Code5/8 TBE&J-12
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty
ROHN 5/8TBE&J 5/8" x 12" Round Eye to Jaw Turnbuckle
Round Eye Turnbuckle, Forged, Hot Dip Galvanized, Open Body, Eye to Jaw, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs...
Down Guy Guard Marker Yellow Plastic
Price$8.95
Manufacturer Code115-Cable Guard
Average RatingRate it!
AvailabilityUsually ships in 24 Hrs
Qty
PLP 115-Guy Guard Down Guy Marker Yellow Plastic
PLP Guy Markers (Guy Guards) are made of high impact UV stabilized plastic and provides durable, high impact, economical protection for exposed utility pole guy wires, dead end fittings, and anchor rods. Measures 1-1/2" X 8'.
Safety-Guy-Wire-Dispenser
Price$12.95
Manufacturer CodePLP-GWD
Average Rating5
AvailabilityUsually ships in 24 Hrs
Qty

  GWD Safety Guy-Wire Dispenser
The Safety Guy Wire Dispenser is designed to provide a functional and safe way of paying-out strand.

It provides an economical means of reducing hazards related to uncoiling strand. The Guy-Wire Dispenser

eliminates runway coils and simplifies the banding or taping of coils ...

Your Cart
Credit Cards Taken
Your shopping cart is empty!