CB04O Outdoor Controller for Low Intensity Obstruction Lights
3 Star Inc >
3Starinc’s CB04O Outdoor Control Box for Low Intensity Obstruction Light Systems is an outdoor microprocessor controller device for monitoring and controlling obstruction lights, mostly for telecom, GSM, Microwave and TV towers. Connected with external photocell, the control panel will automatically turn the obstruction lighting system on/off from dusk to dawn. Even during the day time, the control panel is still in monitoring status. CB04O can be preprogrammed for different obstruction lighting configurations. Each branch has a maximum power output of 100W, this product features current detection and a common alarm relay output.
The CB04O has a user friendly LED monitoring display, Both NO and NC alarm contacts are available.
Features-Mechanical
• Aluminum alloy Enclosure, IP67, outdoor type, good corrosion resistance
• Circuit breaker switch, surge protection and terminal block are suitable for DIN rail mounting
• The enclosure door is secured by four captive screws
• Supplied with PG13.5 cable glands
• Four threaded mounting holes in the back of control box
• Suitable for attaching to any vertical surface or rack mounting
Features-Electrical
• Control up to four channels light output, each channel control up to four LED low intensity obstruction lights or one LED medium intensity beacon.
• Steady-burning and flashing mode adjustable by DIP switch
• Auto/manual mode by DIP switch
• Photocell with prewired shielded cable in five meters long
• Transfer relay for “service+standby” double obstruction light system
• LED indicator for lights, power, photocell operation status
• Dry contact alarm output for lights ,Photocell and power
• NO or NC alarm-common output alarm terminal
• Over voltage protection and MOV surge protection
• Circuit breaker protection and fuse protection
Download
LIOL Low Intensity Obstruction Lighting for Tower Aviation Marking
Low Intensity Obstruction Lighting are lights used to visually mark obstacles and obstructions. These lights are necessary in providing a clear visual indicator and in preventing collisions in poor visibility conditions or at night.
Applications
- Airport Buildings
- Tower Cranes
- High Buildings
- Bridges
- Smoke Stacks
- Cell Towers
- Broadcast Towers
- Communication Masts
- Weather Masts
- Power Substations
- Transmission Line
- Wind Turbines
POWER
Three different types of power technology are used to power these LED LIOL lights.
- Solar- The power is supplied by a battery. This battery is charged during the day using embedded solar panels. At night and when there is insufficient solar available, the units will switch over to battery power. This all happens automatically.
- Universal AC Line Power- Power must be provided using a power cable that can supply AC current (110–240VAC 50/60Hz). Can also be powered with optional solar and/or battery.
- Universal DC Line Power- Power must be provided using a power cable that can supply DC current (12–48VDC). Can also be powered with optional solar and/or battery.
LED TECHNOLOGY
All the LIOL lighting we carry, uses the latest advancements in LED (Light Emitting Diode) technology as a light source. The major advantage of LED’s over traditional light sources is well established in that they typically have an operational life in excess of 100,000 hours, resulting in substantial savings to maintenance and servicing costs.
Antenna Tower Lighting and Marking Links
- FCC Antenna Tower Lighting and Marking Requirements.
- FCC TOWAIR Determination - Calculator to determine if a structure at a particular location must be registered.
- 47 CFR Part 17 - Construction, Marking and Lighting of Antenna Structures.
- FAA Advisory Circular AC 70/7460-1M - With Examples of obstruction painting and lighting patterns.
Sorry, we are offline,
click here to send us message
